Search tips
Showing 25 results View by: Thread Post Sort by

  • ONET1191P: ONET1191p

    Part Number: ONET1191P Do you have any example layouts using the ONET1191? What I am seeing with my layout is that with no input signal, the output oscillates at 9.3 GHz. Or do you have any other suggestions on how to suppress it? Thanks Tom

  • ONET1191P: ONET1191P OFFSET

    TI Thinks Resolved
    Part Number: ONET1191P Hi, I am using the ONET1191P and I have seem to the encounter the same issue where I get an offset input voltage of ~ 1.7 V. Schematic is shown below. Even when I do not put any signal in, I get a 1.7 V offset on the input…

  • ONET1191P: Single ended operation

    TI Thinks Resolved
    Part Number: ONET1191P For single ended operation, how should the unused output port be terminated?
    • Answered

  • ONET1191P: data rate (Gbps) vs clock frequency (GHz)

    Resolved
    Part Number: ONET1191P I'm confused about the clock frequency vs data rate for the ONET1191p. The datasheet says the part can go up to 11.3 Gbps operation, but the high-frequency 3db BW is as low as 8 GHz (and as high at 15 GHz). And the frequency response…
    • Resolved

  • ONET1191P: Junction to case and junction to board thermal resistance

    TI Thinks Resolved
    Part Number: ONET1191P Hi Team, May I check with you what is the junction to case and junction to board thermal resistance? Thanks. Best Regards, Ernest

  • ONET1191P: Output showing a 6Ghz oscillation on custom PCB

    TI Thinks Resolved
    Part Number: ONET1191P Other Parts Discussed in Thread: ONET8501P , ONET1151P , ONET1151L Team, Could you please help with the below question: F or this project we want to amplify the signal delivered from an external fast photodiode amplifier of…
    • Answered

  • ONET1191P: Limiting amplifier S parameter models

    Resolved
    Part Number: ONET1191P Dear TI, I need the S parameter models for the following IC: - ONET1191P - ONET8501P - ONET4201PA . The S parameters are reported in the datasheet but I need the data for simulations. Can you please help me? Best…
    • Resolved
    • Answered

  • ONET1191P: Limiting amplifiers S parameter models required

    Resolved
    Part Number: ONET1191P Other Parts Discussed in Thread: ONET8501P , ONET4201PA Dear TI, I need the S parameter models for the following IC: - ONET1191P - ONET8501P - ONET4201PA. The S parameters are reported in the datasheet but I need the…
    • Resolved
    • Answered

  • ONET1191P - Questions on data sheet

    Resolved
    Other Parts Discussed in Thread: ONET1191P , ONET8501PB , ONET1151P Hi, currently I'm evaluating limiting amplifiers for 10G optical communications. So I found the limiting amplifier ONET1191P. After reading the data sheet, I've got some questions.…
    • Resolved
    • Answered

  • ONET1191P / acceptable low data rate

    Resolved
    Other Parts Discussed in Thread: ONET1191P , ONET4201PA Hi Team, Now our customer is evaluating ONET1191P with LVDS input signal. Then now they are asking if ONET1191P can accept lower data rate like 160Mbps. And also we need to consider the 8b/10b…
    • Resolved

Didn't find what you are looking for? Post a new question.