Part Number: OPA192 Other Parts Discussed in Thread: OPA2376
Hello Experts,
I want to design a voltage buffer with a slew rate limiter. I am referring the below document for my design.
Now In this design, I_C1 is considered as 10uA and Saturation voltage…
Hi Alexander,
There are many ways to drive TEC device. For Space application, the option is limited due to Radiation Hardening requirements. Here is an example with H-bridge.
OPA192 TEC Drivers 12082020.TSC
If you have other questions, please let me…
Part Number: OPA192-Q1 Other Parts Discussed in Thread: OPA192 Hi team,
My customer want to transfer "slope of pulse" as shown in attached material, but it doesn't work as expected.
Could you check attached material and support it?
Best regards…
Part Number: OPA192 Other Parts Discussed in Thread: TINA-TI , TL431 , TLV431 Hi Guys
our customer is using our OPA192 as high side current sense. common mode voltage is 12V. They set the output current protection 75A. But when we test this current sense…
Part Number: OPA192 Other Parts Discussed in Thread: THS3491 , OPA211 , LMH6629 , OPA1611 Hi, Gentleman:
I evaluate the OPA192 and want to check the OPA192 output noise.
For the 0.1Hz to 10Hz noise, I must develop one own band pass filter to measure the…
Part Number: OPA192 I am using a OPA192 in a Howland Current Pump Circuit.
But with a higher resistance load like the 2K shown the Current shuts down when the input is above 2.5V
I think I am within all of the input and output specs but it does not work…
Part Number: OPA192 The output current of TPS7A4901/TPS7A300A is 150mA.
Use TPS7A4901/TPS7A3001 to supply the ±12V , the current is enough to driver 3 OPA192 or not?
Thanks!
Hi Kai,
Yes I have already reviewed this LDR.
I have one additional question.
How did you simulate the OPA and your circuit?
I am currently using Autodesk Eagle S/W (this is non-changeable) and I am having trouble in mapping the OPA schematic to the…
Part Number: OPA2192 Other Parts Discussed in Thread: OPA192 Tool/software: Hi team,
I use below circuit to test the CMRR of OPA2192:
however the result is different from datasheet:
datasheet shows opa2192`s CMRR can keep 140dB till 10kHz, but my test…
