Hello Dardan,
Thank you for bringing this up, I will talk to the team and make sure we correct this on the datasheet.
In the calculation it should be 300ns instead of 800ns, with that difference the BW should needed should be closer to ~18.7MHz…
Part Number: INA827 Other Parts Discussed in Thread: OPA192 , LM324 , OPA325 , OPA191 , OPA391 Hi team
Good day
My customer have a question:
I have 3 INA827 instrumentation amplifiers , all the three reference pins are driven by a single buffer…
Part Number: THP210 Other Parts Discussed in Thread: , OPA325 , THS4551 , OPA320 , THS4561 , OPA350 , OPA365 Hi, I am looking to use the THP210 to change a single-ended voltage source of 0-5V to a differential representation for measuring by a 16-bit…
Part Number: OPA391 Other Parts Discussed in Thread: OPA325 , OPA387 , OPA388 , OPA369 We have a problem with the OPA391DCKR. Simply used as a voltage follower, we sometimes get (scattered over several patterns) such characteristic curves:
…
Praful,
The circuit works properly in simulation (see below) and the lower price version would be TLV333.
Having said that, since OPA330 (and TLV333) are chopper amplifiers, you may run into an error issue related to a mismatch of the gain resistors…
Part Number: PGA2320 Other Parts Discussed in Thread: OPA325 , OPA1688 Hi Team, We want to use a speaker in one of our products. The system is battery-operated (3.7V nominal voltage). I will need an audio input circuit to digitize the audio signals. I…
Hi Michael,
Thank you for your detailed response. I noticed that the competitor you are looking at may not be the one which was originally posted. The competitor you mention is a much higher speed. Given the competitor from the original post, the OPA388…
Part Number: TLV07 Other Parts Discussed in Thread: INA818 , OPA320 , OPA325 , ADS8326 We are trying to implement instrumentation amplifier using tlv07 opamp to amplify 10mV signal 500 times. The circuit is something like this(the voltage source provides…
Hi DDdoor,
In order to answer your question, we need to have an schematic and understand which ADC device the Customer is using, the resolution requirements of the ADC and the maximum sampling rate or minimum acquisition time required in the application…
