Part Number: OPT3004EVM Other Parts Discussed in Thread: OPT3001EVM hi TI,
I bought the OPT3004EVM Kit, and there is mention of a software called 'OPT3001EVM Software' that is not shown on the ' www.ti.com/.../OPT3004EVM site. Could you please…
Part Number: OPT3004EVM Hi
Please can you provide the CE/EU Declaration of Conformity for OPT3004EVM ?
The product is CE marked but the CE/EU Declaration of Conformity is not available on the T.I website,
Thank you
Chris
Part Number: OPT3004EVM Hi sir
DUT will be placed on the holder and ALS PCB will be installed below the holder.
When I adjust ALS PCB to LED distance from 9mm to 35m with different LED driving current, the LUX value should be showing linear curve.
however…
Part Number: OPT3004EVM Other Parts Discussed in Thread: OPT3004 Dear Sirs,
My customer found while they test IR rejection performance with a black box, there is still IR influence with OPT3004.
Below is some photo for their test and customer use 850nm…
Part Number: OPT3004EVM Hi, Good day. Our customer is using the OPT3004EVM and they have inquiry about the interrupt as described below. I have setup an application to trigger an alarm in case of reaching high and low limit by setting the registers 0x02…
Part Number: OPT3004EVM Other Parts Discussed in Thread: OPT3004
For this brightness OPT3004, if the angle is less than 45 °, Did it well-distributed decrease or not, for example, I only have 40 degrees? I am worried if there will be any abnormalities…
Part Number: OPT3004EVM Other Parts Discussed in Thread: OPT3001EVM Dear TI,
The OPT3004EVM User's Guide describes the installation and operation of the OPT3004EVM software but we can not find the software into the OPT3004EVM Product folder on the TI…