Part Number: OPT4060 Other Parts Discussed in Thread: OPT4001 , OPT4048DTSEVM , , OPT4048 Tool/software: Hello,
How to set the conversion time to 600us. This option does not appear in the list.
Many thanks in advance.
Part Number: OPT4060 Tool/software: I am using the OPT4060 to try and measure PAR. When I try and calibrate the sensor against a known 0.1% accuracy sensor however, there are obvious bins produced when the range is automatically adjusted. In the datasheet…
Part Number: OPT4060 Tool/software: Hi all,
Hopefully someone has encountered this issue and knows the root cause. But going solely from the datasheet, I don't understand why this is happening.
I have the OPT4060 configured for latching interrupts…
Part Number: OPT4060DTSEVM Other Parts Discussed in Thread: OPT4048 Tool/software:
Garbage Values The sensor outputs garbage values regardless of the measurement environment. The values differ significantly from the results shown in the GUI.
Register…
Part Number: OPT4060 Tool/software: There is a typo in the OPT4060 datasheet regarding CRC calculation. It appears to be the same error that was pointed out in a thread last year for the OPT4048 . In each instance that "CRC_CHx" is mentioned in the calculation…
Part Number: OPT4060 Other Parts Discussed in Thread: OPT4048 , OPT4003-Q1 Tool/software: For an application involving color sensing of tiny particles moving fast in front of the sensor I see the OPT4060 has a conversion time from 600 μs, but the "Light…
Part Number: OPT4060 Tool/software: The datasheet specify (page 12) that :
– Register trigger: An I2C write to the M register triggers a measurement. The register value is reset after a successful measurement. INT pin can be configured to indicate measurement…
Part Number: OPT4060 Hello,
I'm in need of 5 Color sensors and 3 ambient color sensors on the same I2C bus without bus multiplexors. I know I can use 4 OPT4060 at addresses 0x44-0x47. I've looked at other TI light sensors and it looks like they follow…
Hi Hayashi-san,
Thank you for your patience.
The correct conversion is lux=ADC_CODES_CH1 x 2.15e-3. I believe you may have an outdated version of the GUI. Please download the latest software from the OPT4060 EVM product page and let me know if this solves…
