Part Number: PCA9534A Hello, I have a question about PCA9534A. Is it OK to apply a signal (5 V applied) to the input when powering down? conditions Vcc = 0 V, SDA, SCL = (5 V) P1 = signal applied (5 V) Thank you.
Part Number: PCA9534A Customer requesting the below information:
maximum thermal design power,
maximum junction temperature (Tjmax) operating and absolute,
junction-to-case thermal resistance (Theta JC),
junction-to-board thermal resistance (Theta…
Hi Jon,
Sorry for the delayed reply.
Question 1 -> Maybe you'll need to add status="okay";. And also the node should be completed with the i2c specific settings:
&i2c2{
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay…
Other Parts Discussed in Thread: PCA9534A , PCA9534 Hi all,
Our device has got this port expander in order to enable/disable a switch.
The first purchase we made was the PCA9534A which has the I2C address (0x38) and in the package is written ZVJTI…
Other Parts Discussed in Thread: PCA9534A , TCA9534A
Dear Technical Support Team,
I have a question about POR for PCA9534A.
Customer has a problem of POR, so they have a plan to change it to TCA9534A.
But we'd like to know the POR…
Other Parts Discussed in Thread: PCA9534A Hi all, I am using the ic pca9534A , am not using the INT OUTPUT PIN, no used no connection. Is there any problem if I dont connect the INT PIN?.
Regards and Thanks in advance
Rosa
Other Parts Discussed in Thread: PCA9534A , TMS320F28335 hi Folkz,
We are using the PCA9534A port expander
interfaced with the TMS320F28335 . We could write to the port expander
and test it (writing values to the Output Port Register. and checking the…
Part Number: TMP411-Q1 Other Parts Discussed in Thread: PCA9534A , I saw some of the datasheet like pca9534a indicates the tolerance of the High in the datasheet:
I can calculate the tolerance of high by this diagram. (tolerance = 1.0-0.8=0.2 (mm…
Part Number: TCA9548A-Q1 Other Parts Discussed in Thread: PCA9534A , I saw some of the datasheet like pca9534a indicates the tolerance of the High in the datasheet:
I can calculate the tolerance of high by this diagram. (tolerance = 1.0-0.8=0.2 (mm…
Part Number: SN3257-Q1 Other Parts Discussed in Thread: PCA9534A , I saw some of the datasheet like pca9534a indicates the tolerance of the High in the datasheet:
I can calculate the tolerance of high by this diagram. (tolerance = 1.0-0.8=0.2 (mm…
