Part Number: PCM1774 Tool/software: Hi, TI expert
A customer has requested a schematic review of the PCM1774.
- Application: Industrial and vehicle driving record type AI BOX.
Please review whether there are any parts to be modified or added…
Part Number: PCM1774 Tool/software: Dear TI experts,
My customer has a question that SCKI signal should needed if my customer use PCM1774 as slave mode.
Could you check about it?
Best regards,
Chase
Part Number: PCM1774 Other Parts Discussed in Thread: TAD5242 , TAD5112 , TLV320DAC3120
Tool/software:
Hi, TI expert
The customer is looking for an Audio DAC.
- Application: Industrial and vehicle driving record type AI BOX.
The Audio ADC is…
Part Number: PCM1774 Other Parts Discussed in Thread: DRV135 I want to use 1 line output to connect a wireless audio module and 1 line output to connect a balanced driver DRV135. Do I add first a DAC filter after the PCM1774 or is the digital DAC filter…
Part Number: PCM1774 Hi I am using an STM32F7 for audio playing via I2S directly to the PCM1774. It's working perfectly for 20 second and after I get for 4 second an audio with noise. This noise it's came periodically after each 20 second for 4 second…
Part Number: PCM1774 Hi,
I am using the PCM1774 audio DAC for a wearable device and I would like to confirm the schematic for Line output instead headphone.
- Do I need to add a resistor of 10K to the HPOL and HPOR for impedance matching because the…
Part Number: PCM1774 Hi,
my customer uses two PCM1774 and has the following questions:
Reading the datasheet I was not able to found a register that configure the PCM1774 output as a line output (load > 10k Ω ) or a Headphone output (load 16 Ω or…
Part Number: PCM1774 Hi :)
My customer wants to use PCM1774 an they do have some questions, maybe you can help.
They would not use AIN1L and AIN1R.
1: What is the recommendation for this two inputs ?
2: is there a recommendation for Ground…
Part Number: PCM1774 Hi,
My customer is trying setting clock frequency as below;
SCLK: 8MHz, FS:31.25kHz, BCLK:1MHz
BCLK/FS=32 in this case.
However, there is no "32" in BIT CLOCK BCK ot table 9/10 on the datasheet.
Does it mean that this setting…
Part Number: PCM1774 Hi,
The default value of NPR and MSR is "0" as below;
On the other hand, All "0" data is nothing on the table9 of the datasheet.
Does it mean that internal PLL is disabled on the default condition?
Best Regards,
Kuram…
