Hi Arash,
I removed the filter caps from the reconstruction filter, and the ramping is still present. Just for fun, I wired in an "AUDIO DAC SHIM" (a PCM5100A for Raspberry Pi) to the same supply, clocks and data feeding the PCM1795. There's no ramp present…
Part Number: PCM1795 Hello.
I am currently planning to use PCM1795 for my project.
Referring to the datasheet, there was no specific mention of the power sequence for the PCM1795, other than the specification of power-on reset.
Are there any other restrictions…
Part Number: PCM1795 Hello Experts, Customer would like to know the output current variation(Min and Max). The datasheet specified it as 4mA(typ) but Min/Max doesn't specified. Would you please provide it? Best Regards, Fujiwara
Hi Mr frost. Thank you for trying.
The output will stop when changing invalid data from 0x5555 to 0x0000. The output will be full range when changing invalid data from 0x5555 to 0x7fff. (FMT[2: 0]=100:32bit I2S setting)
I thought that there might be a problem…
Part Number: PCM1795 Other Parts Discussed in Thread: PCM1794A Hello Sir,
One of my customer gona to use 2pcs PCM1795 to achieve 4CH output. Could you help to check their connection?
TDMCA mode can transfer both control signal and audio signal. Does it…
Part Number: PCM1795 Other Parts Discussed in Thread: DSD1796 , PCM1796 Hi,
can DEM-PCM1796 and DEM-PCM1795 use the same software?
If available, please could you provide DEM1796.exe, DEM1796.ini, Vbrjp200.dll, Ver.dll and Inpout.dll.
If not available, please…
Part Number: PCM1795 Dear Team
I need to support the following sample frequencies, can I use it with this device? (Is the system clock detection circuit operating and the output stopped?) ・ 26.2144KHz ・ 32.768KHz ・ 40.96KHz ・ 51.2KHz ・ 81.92KHz ・ 102.4KHz
Best…
Part Number: PCM1795 Hello,
Total Icc current consumption specification is 18mA(typ) @44.1KHz on the datasheet.
There are 3pins(#15,#23,#28) connection for analog Vcc +5V power supply.
Our customer try to add independent noise de-cupping RC filter for…
