Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: PCM1862-Q1 Other Parts Discussed in Thread: PCM1862 , Hi, Team:
Can you help to provide a comparison between PCM1862-Q1 and PCM1862 ? Customer may want to use both part in same Tbox project and want to understand the difference.
One more detailed…
Part Number: PCM1862-Q1 Other Parts Discussed in Thread: PCM1862 , , PCM1860-Q1 , PCM1840 , PCM3168A Hi
Since customer needs TDM, and two or four simple channels audio ADC, no gain control is needed. Does PCM1862-Q1 work without I2C Configuration? Or say can…
Part Number: PCM1862-Q1 Hello Team,
My customer is using AVDD and DVDD same 3.3V rail and IOVDD 1.8V.
Is there any timing requirement between the 3.3V and 1.8V?
If there's no strict requirement in miliseconds, what should come first between 3.3 or 1.8…
Part Number: PCM1862-Q1 Hi team,
customer use PCM1862-Q1, below is their setting and schematic, but don't have I2S data output.
I2S use TDM/DSPmode (TDM/DSP (256fS BCK is required))，duty cycle of LRCK is 50%，
reg setting:
The schematic:
SCKI is internal…
Part Number: PCM1862-Q1 Other Parts Discussed in Thread: PCM1862 1. If PCM1862 uses TDM cascade, does it support 12-channel microphone input?
2.If PCM1862 uses TDM cascade, does it support 12-channel microphone input?
Part Number: PUREPATHCONSOLE
Tool/software:
A table with links to all the software needed for audio devices and their EVMs. Find the device(s) of interest in the table and use the links to request access to the software you need.
Product or Part …
Part Number: PCM1862-Q1 Other Parts Discussed in Thread: PCM1862 For the PCM1862, currently ADC setting is as below ：
MIC1 --> VIN3P/M --> ADC1_L --> TDM slot 1
MIC2 --> VIN4P/M --> ADC1_R --> TDM slot 2
If I want to set MIC1--> TDM slot 2,…
Part Number: PCM1862-Q1
Hi! I'm creating a design for two microphones, it is not sure what kind will be used so I need the card to function either way. Would this design work for both singel ended and differential with just removing and adding the…
Part Number: PCM1862 Other Parts Discussed in Thread: , PCM1864 [ PCM1862-Q1 ] TDM Configuration with three PCM1862-Q1
Hi, Can you help me to understand how three PCM1862-Q1 can be configured for TDM use? My customer would like to use three PCM1862-Q1 as…
Part Number: PCM1862-Q1 Other Parts Discussed in Thread: PCM1862 , PCM1860 Hello.
I am trying to desing a audio card to use with pine64 ( www.pine64.org/
I am thinking to use PCM1862-Q1 IC( www.ti.com/.../pcm1865-q1.pdf schematic on page 23).
I will give…
