Part Number: PCM1865EVM Other Parts Discussed in Thread: PCM1865 Content: Hello,
I am trying to use the PCM1865EVM with PurePath Console2 via the USB-I2x interface board, but I am unable to get the USB-I2x board recognized properly by my PC.
Issue…
Hey Nicholas,
If you look toward the bottom of the EVM page here:
under design files you can download the gerbers for this project.
I hope this helps!
Best,
Zak
Part Number: PCM1865EVM Other Parts Discussed in Thread: PCM1865 , PCM1863 , PCM9211 Hello,
I am working with PCM1865EVM audio codec.
I want to interface single channel FM tuner with this audio codec. Below is more details for the configuration. …
Part Number: PCM1865EVM Other Parts Discussed in Thread: PCM1865 Hello, I am working with PCM1865evm to configure it with 4ch TDM interface.
I am using external host iMX8M board as master and PCM1865 as slave.
I need some help for PCM1865 slave configuration…
Part Number: PCM1865EVM I have ordered the PCM1865EVM board on line, the order number is 1842268 . I have received the package by yesterday, then I requested for the PCM1865EVM GUI on line. May I know when I can get the GUI package? Thanks.
1842268
Part Number: PCM1865EVM I have PurePath Console 2 version 2.2.1 which no longer opens. The application opens the splash graphic and after ~30s this disappears and the application does not open.
Any help would be greatly appreciated.
Hi Zak,
I am getting the I2C address correct from iMX8M board as well.
Even I am not able to configure the I2C registers from the PurePath tool through USB-I2X after removing those I2S lane registers (i.e. R3, R20, R21. R22).
I don't understand…
Part Number: PCM1865EVM Hello,
I am working with PCM1865EVK, i have that board with me.
I have raised request for PurePath Console access for PCM1865EVK few days back but didn't get access yet.
Please help me with that console access as soon…
Hi Zak,
Thank you for this understanding.
One thing i noticed here,
I removed those four resistors from PCM1865evm board.
Before the removal of these resistors, i was able to write configuration registers through iMX8M board.
But now i am…
