Other Parts Discussed in Thread: PCM1870 , PCM1870A Hello,
I use since one year the component PCM1870. For some time the status is NRND. How long is the component available?
Other Parts Discussed in Thread: PCM1870 , PCM1789 I use PCM1789 & PCM1870. PCM1789 & PCM1870 for CLK - SCKI : 12MHz, fs : 46.875 KHz, BCK = 3MHz I don't get certain data. I Know that don't support fs(46.875KHz). But 46.875kHz is similar to…
Other Parts Discussed in Thread: PCM1870A Going through the PCM1870A datasheet, I noticed figure 10 and figure 11 show the SNR for single ended and differential input modes, and it appears that single ended has better SNR than differential for both unity…
Other Parts Discussed in Thread: PCM1870 I am using the PCM1870 ADC and would like to implement 60 Hz and 120 Hz notch filters, with 10 Hz bandpass. The sampling frequency is 32 KHz. I have calculated the filter coefficients following the data sheet for…
Hello Collin-san,
Actually, we've already recommended newer parts but the customer somehow prefers PCM1870 as it meets their use case better. I'll ask the customer about why they prefer PCM1870.
In the meantime, can you please address the D/S…
Part Number: PCM3070RHBEVM-K Other Parts Discussed in Thread: PCM3070 , PCM1870 , PCM5141 , PCM5122 , PCM5142 , PCM5121 Hi,
I have a PCM3070EVM-K and am attempting to get PurePath Studio to download code to it. A popup box says
Warning: This board has an invalid…
Other Parts Discussed in Thread: PCM1870A , PCM1870 Hello team,
Hope you are well.
Also, would you be able to help out with below customer question:
I would like to ask a question about PCM1870A.
According to the website, it seems that TI doesn't recommend…
Hello,
The DEM-DAI1774 EVM was the EVM used for the PCM1774. This was old nomenclature for EVM. Today we just use the part number with the addition of EVM in the name. We no longer offer an EVM for the PCM1774 as it is an old part. For new designs we…
Other Parts Discussed in Thread: PCM1870A , OMAPL138 , TLV320ADC3101 , TLV320AIC3106 , PCM1870 Hi,
for my new design I am using PCM1870A for converting stereo microphone to 16bit TDM.
I config the ADC to be in slave mode.
I provide the signals for the ADC from…
