Part Number: PCM2706 Hi
Customer use PCM2706CPJTR as my audio design. Currently, I have a pop-noise issue and symptom as below.
Speaker plug in DUT R/L.
Power on system into Windows 10 or plug in and out QB-058 from USB port.
Can hear "Bo" noise sound…
Part Number: PCM2706 Hi TI experts,
Please review the attached schematic.
1. They connect a memory stick and try to play a sound source. Can PCM2706 play Wav files on the memory stick?
2. Is it recognized as an Audio device when connected…
Part Number: PCM2706
Typical Circuit Connection 3 of the datasheet (page 30), FUNC3 pin is used as I2S DIN. It looks like receiving barge-in signal from amp.
If I make circuit as link below, Can I send and receive on Windows PC?
Part Number: PCM2706 Dear
I'm looking for USB to I2S bridge IC for Telechps AP's EVB.
Following figure is block diagram of our system.
On web-site, I found the datasheet of PCM2706. but I could't confirm somethings.
I have some questions…
Part Number: PCM2706 Hello:
We have an customer found that PCM2706 can't output Analog DAC when Function select I2S,but it's ok that Function select S/PDIF output Analog DAC,can we help solve this problem.
Part Number: PCM2706 We're connecting the PCM2706 (USB audio CODEC) to a TPA2011 (analog class-D amplifier). It looks like we should be able to connect one of line outs from the PCM2706 to in+ on the TPA2011, and VCOM from the PCM2706 to in- on the TPA2011…
Part Number: PCM2706 Other Parts Discussed in Thread: TAS5713 , , TAS5754M Hi Steve, I was trying to make an I2S demonstrator using a PCM2706 evaluation module from AliExpress and a TAS5713 soldered to a breakout-board.
The I2S signal generated by the…
Part Number: PCM2706 Other Parts Discussed in Thread: PCM5102A , Develoment envirment: windows7, PCM2706C i2s output, pcm5102A DAC
when i stop to play the music, the pcm2706c will output about 10s I2S signal, and this will cause weak noise in next DAC, …
Part Number: PCM2706 Hi all,
In sleu116.pdf in the schematic "Figure 2" there is a AT24C64N Flash connected to the PCM2706/7.
This type of flash needs 2x8 bit address to read/write.
But as reading external USB-descriptors did not work out in…