Part Number: PCM4202EVM Other Parts Discussed in Thread: PCM4202
Tool/software:
Hi,
We are trying to use the PCM4202 in DSD mode.
The power supply of +15 V, -15 V, +5 V digital and +5 V analog have been provided with internal regulation of +3…
Hi Collin ok I'm looking for the most useful processor for this project. I know the Raspberry / Arduino family very well, they are not useful for this realization. I will keep you informed .. thank you very much eugenio
Part Number: PCM4202 Other Parts Discussed in Thread: , OPA1632 Hello,
Our customer had proceeded to build ES unit and measured noise floor of PCM4202.
Then low frequency 20Hz noise floor level is 15dB higher from 1KHz.
And also Vcom noise characteristics…
Thanks for the reply!
Judging by the PCM4202EVM picture, there are 2 XLRs (probably 2 stereo inputs considering you said there is no DAC). The product description says, "This PCM output is made available at terminal J4 and AES3 encoded outputs at RCA…
Hi Don-san,
We understand that the density of "1" of DSD format will be highest at full-scale input, but we can not find any example waveform. Can you measure the waveform of DSD format if you have PCM4202EVM or other audio ADC which has DSD mode…
Hi, Knut,
I suggest you review the EVM for the PCM4202 (PCM4202EVM). I think this will answer a lot of your questions. After you've looked that over, please come back with any other questions.
As for the unused pins, if they are an input with…
Other Parts Discussed in Thread: PCM4202 , PCM4202EVM
Customer has complaints of the PCM4202 having large phase delays .
Setup:
1) Using PCM4202 eval board
2) Providing a quadrature signal Sin to L and cosine to R channel as Inputs
3) Fs…
