Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: PCM5100A-Q1 Dear team,
This device's output doesn't have the short to ground and short to battery functions, right? My customer needs to do such tests: output short to ground and output short to battery. If they do such tests on the device…
Part Number: PCM5100A-Q1 Dear Sir,
Customer looking for DAC (Automotive Application), especially need Full diagnostic functions (short, open, over temp, DC offset, etc).
I cannot found suitable device, pls advise it.
Thanks,Ian.
Part Number: PCM5100A-Q1 Our customer is facing issue of "No sound output" after Power Save Mode in PLL operation mode.
On datasheet page33 there is description as below.
************************************
When expected audio clocks (SCK,…
Part Number: PCM5100A-Q1 Hi,
I would like to use 12KHz sampling rate(WCLK) on the PMC5100.
Below is my question,
What SCK frequency should I use for the 12KHz sampling frequency?
below capture has in data sheet page24 but it does not have 12KHz sampling…
Part Number: TPA6211A1-Q1 Other Parts Discussed in Thread: TPA6211A1 , PCM5100A Hi TI FAE，
The audio block diagram of TPA6211A1 is as follows. Can the analog audio output be directly connected to the external power amplifier? Is it necessary to add a direct…
Part Number: PCM1754-Q1 Other Parts Discussed in Thread: PCM5100A-Q1 Hi Team,
My customer wants to know the current when PCM1754-Q1 is shutdown. But I find that PCM1754-Q1 doesn't have shutdown mode. So I suppose I can give him the standby current value…
Part Number: PCM5102A-Q1 Other Parts Discussed in Thread: PCM5100A , PCM5101A , PCM5102A [ PCM5102A-Q1 ] Power On Reset Threshold Voltage and Required Low Duration
Hi, In order to perform POR correctly, are there any voltage range of 2.8V and its duration…
Dear Derek,
Based on your input , my calculations for TPA3112 is 15.95W @1% THD, 13.5V.
Attached worksheet for reference. Please let me know if any thing is missing to include ? TPA3112.xlsx
Regards,
Habalappa
The DAC101S101-Q1 is specifically qualified for automotive applications (-Q1). Otherwise, it is considered a precision DAC, and is used in application where precise DC performance is required. Audio is generally not a precision DC application but a AC…
