Part Number: PCM6260-Q1 Tool/software: i have the pcm6260q1_evm board,I have installed PP3application, i need pcm6260.app ?my ti sign is :liqing@gefei-tech.com.
Part Number: PCM6260-Q1 Tool/software: Dear TI Team
Below schematic mark green need to realize in our design！
Could you please help confirm whether PCM6260 could realize？
Based on my analysis, it is necessary to provide bias voltage to MIC(MIC impedance…
Part Number: PCM6260-Q1 Tool/software: Hi expert,
I see from datasheet that we need config ADC channel gain before power-up.
How to understand power-up? We need config channel gain after enable micbias/en channel?
My customer is using external…
Part Number: PCM6260-Q1 Tool/software: Hi expert,
How can we test the audio performance of PCM6260-Q1?
Can we use Audio precision to test it's SNR/THD/interchannel isolation?
Thanks!
Part Number: PCM6260-Q1 Tool/software: Hi team,
Can you please help review the PCM6260-Q1 SCH as below? Thanks
SCH_SGM_8397_PCM6260_0912.pdf
Best Regards,
Xiaowei Zhang
Part Number: PCM6260-Q1 Tool/software: We tested the TDM waveform quality of PCM6260 on PCBA PCM6260 has two requirements for TDM signals, td(SDOUT-BCLK) and td(SDOUT-FSYNC) Currently, the measured value exceeds the MAX value required by PCM6260 , which…
Part Number: PCM6260-Q1 Tool/software: Hello team,
What's the difference between PCM6240 and PCM6260 about the function?
From the two datasheets ,pin 3,4,5 is different while other pins can be pin-to-pin.
About PCM6260,if the voltage of VBAT is…
Part Number: PCM6260-Q1 Tool/software: I have a design where the DC bias of the signal from the microphone is 1.25V. The ADC is reading this DC level at -5 dBFS. The internal MicBias is turned off, and I am not seeing any other details in the datasheet…
Hi Lakshmi,
Lakshmi Narasimhan Badrinarayanan said: 2) I am not clear on the 3rd setting observation, does that mean that when WCLK current is 12mA, the CH1 recording is clean on the PCM6260-Q1?
When WCLK current is 12mA, the CH1 on the PCM6260-Q1…
