Part Number: PCM6260-Q1 Hi Expert:
I'm working with the customer to evaluate PCM6260-Q1 6 channel Audio ADC (with noise cancellation) max power consumption to do thermal performance simulation.
But I cannot find VBAT and MICBIAS operating max power…
Part Number: PCM6260-Q1 Hi, Expert:
I have a question about PCM6260-Q1 power supply ramp rate. As below figure shows, datasheet demand supply ramp rate should faster than 1V/us. But, due to power supply IC has soft start function, the system design…
Part Number: PCM6260-Q1 Hi team，
1、The customer is using PCM6260-Q1 as the Bluetooth microphone ADC to output to H3 SOC. During the handfree test, the TDM data output by PCM6260 collected by H3 has the following red circle convex hull. This convex hull…
Part Number: PCM6260-Q1 Hi team,
My customer wants to know if there's any potential risk when the MIC+ input line is shorted to the battery (12V), higher than the specified V_MICBIAS = 9V. The customer is currently using the DC-Coupled Microphone Differential…
Part Number: PCM6260-Q1
Hi team,
My customer has been designing with PCM6260-Q1. Is it possible to input 24dBu to PCM6260-Q1 without any distortions?
ADC's input type is differential signal. preamplifier's output impedance is100 ohm, 100kohm input…
Part Number: PCM6260-Q1 Hello，
About PCM6260 input attenuator, I'd like to confirm the DC-Coupled Microphone Differential Input mode is -14dB, what about DC-Coupled Microphone single-ended l Input mode,-8dB?
Differential mode: -14dB=20log(2.828/14…
Part Number: PCM6260-Q1 Hello
Engineers
There are two chips on our circuit board: PCM6240 and PCM6260. The hardware schematics of the two chips are completely consistent (except for the missing parts such as GPIO2).
And my Configuration is that…
Part Number: PCM6360-Q1 Other Parts Discussed in Thread: PCM6260-Q1 Hi Expert,
I would like to know
difference between PCM6360-Q1 and PCM6260-Q1
can I use 6260 to replace 6360 due to the shortage
Thanks for help!
BR,
Elec Cheng
Part Number: PCM6360-Q1 Other Parts Discussed in Thread: PCM6260-Q1 Hi team,
My customer need to modify their schematic due to the shortage of PCM6360-Q1 and they move to PCM6260-Q1. The following is part of their schematic and they use MICBIAS=9 Ｖ…
Part Number: PCM6260-Q1 I transmit 6-ch analog audio in PCM6260 with the output data format is TDM4 in slave mode.
And the FS is 96kHz, BCLK is 128*FS from the master DSP, so the ASI word is 32bit.
Because I use TDM4 mode, so i need use 2 output data…
