Other Parts Discussed in Thread: PGA116 , PGA112 I have a design where I have used a PGA116 for it's multiplexing/calibration capabilities and have had this working happily for a while. Now I need to use the gain block and so I have modified the firmware…
Other Parts Discussed in Thread: PGA116 , PGA117 , PGA112 , PGA113 Hello alltogether,
I don't understand what the daisy-chain commands of PGA112, PGA113, PGA116, and PGA117 are for.
What happens if I use them on a single device?
What happens if…
Part Number: ADS1256 Other Parts Discussed in Thread: PGA116 , ADS1255 , INA849 , I need to convert low voltage differential signal (bridge circuit), some in 10mV range and some in 3-4 mV range, at about 500 samples per channel. Due to low voltage, to…
Hello,
We have similar devices to the MCP6S21, although they do not offer gain of 10; and are not pin-to-pin compatible:
The PGA112 and PGA116 are single-ended input, and single ended output programmable gain amplifiers with binary gains (1, 2, 48…
HI Rajesh,
The PGA280 and PGA281 are the only differential input and differential output precision programmable amplifier; but they require the minimum 10V nominal supply.
We offer the PGA112 and PGA116 that offer binary gains and will work at a…
Gustavo,
Depending on the speed of INA333 input signal, you may consider adding a low pass filter at the output of the INA before feeding it to the input of PGA. If the Scope Gains: 1, 2, 5, 10, 20, 50, 100, 200 is what you're looking for, PGA113 or…
Hi Jared,
The LTC1569 is a programmable filter and the LTC6911 is a programmable gain amplifier. Crosses for these devices are going to come out of the precision team.
We have the UAF42:
Consider PGA281, PGA112/3 or PGA116/7 for the PGA.
Hi Future,
Since you have not provided detailed product design requirements, I will provide you some ideas. This is based on the information you provided so far. The following suggestion is one of the design options.
1. Please take a look at OPA378…
