Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LM5122 Other Parts Discussed in Thread: PMP10749 ,
Hi! I need to design a boost convert the specs with
Application Field : Cold Crank (start stop)
Required Specs for the application : In case of cold crank, the input voltage can…
Part Number: PMP10749 Tool/software: WEBENCH® Design Tools Suggestion for Automotive Application 4-42 in 48V @ 2A Out
I have an unusual application that is automotive based that the customer wants a 48 Volt bulk voltage but must operate down to 4 volts…
Hello Joseph,
12V/10A means 120W. For an input voltage of 2.5V, this means something like 56A if the efficiency of the converter is at 85%. Is your source able to support such a high current?
I think you need to use several converters in parallel for…
Part Number: LM5122 Other Parts Discussed in Thread: PMP10749
Hi,I have designed LM5122 boost converter based on pmp10749 reference design . The converter does not work when initially power supply set to 5 volts and limited below 1.25 Amps(it kills the…
Part Number: LM5122 Other Parts Discussed in Thread: PMP10749
Hi, I designed a dual phase converter based on the pmp10749 boost controller. In two-phase application, the master draws more current than the slave.current sense resistance is 2.2mohm for…
