Part Number: PMP22764 Other Parts Discussed in Thread: TL431 , LM51551 Hi Team,
I following PMP22764 design a 28Vin/56Vo/100W flyback converter. The schematic is attached below.
28 to 55V schematic with CMC.pdf
During the EVT build, I find 3 of 480 pcs…
Part Number: PMP22764 Other Parts Discussed in Thread: LM5156H , CSD19531Q5A , CSD19534Q5A Dear All,
we are designing similar flyback based on PMP22764 with LM5156H IC.
e2e.ti.com/.../3929193
I this e2e thread is stated that the PMP22764 was designed for…
Part Number: PMP22764 Other Parts Discussed in Thread: LM5156H Hi All,
we are designing a similar flyback converter to PMP22764 with LM5156H and have some questions.
1) Input Capacitor selection and calculation on PMP22764
when we use SNVA866 EQ23 to…
Part Number: PMP22764 Other Parts Discussed in Thread: LM5156 Hi David,
Refer e2e thread -
https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1047679…
Part Number: PMP22764 Other Parts Discussed in Thread: LM5033 , LM51551 The PMP22764 uses a Transformer from Coilcraft - ZB1368-AL according to the BOM - but I can't find a Datasheet for this. What is the Transformer's Height...?
Also, I am supporting…
Part Number: PMP22764 Hi Team,
I'd like to design an DC/DC Vin=20-28V, Vout=55V(For PoE application), Pin=60W at 20Vin, 100W at 28Vin isolated converter.
After check the reference design experiment eff around 90%. But, our target Eff is 92%.
1. Do…
Hello David,
We tried the compensation value as your have but in our case we are getting abnormal shutdown of the device. We are still looking into it.
Anyhow, with our design we have designed below transformer . This transformer has gap reduced between…
Part Number: PMP22764 Other Parts Discussed in Thread: LM5156 , LM51561 , LM51551 , LM5155 Hi support team,
The parts layout of tidt115 and tidm849 appear to be different. Isn't the characteristic data of tidt115 the data of the layout of tidm849? Is the…
Part Number: PMP22764 Hi team,
My customer is looking for reference design for 8 port PSE isolated power supply.
The spec : Vin: 20v~48v, Vout:55v, Pout:160W
I have found that pmp22764 which is also for PSE isolated power supply. It is pretty fit to…
Hi Davis,
I have new insights that might show the root cause of the issue. Just as mentioned before, there should be possible improvements on the feedback path.
The important part here is the TL431 clamping diode. The anode voltage rating of this diode…