Part Number: PMP6776
Greetings,
We would like to build a number of PMP6776 boards, to support some of our projects.
Could you send us the corresponding pick and place file (showing the X- and Y- coordinates of all components)?
Our factory would…
Part Number: PMP6776 Other Parts Discussed in Thread: TPS54620 , TPS56121 , , PMP PMP6776 ues TPS56121 as the supply of 3.3v and use the TPS54620 which can provide 6A current as the supply of 1v?
Is there any disadvantage of TPS56121 so that it is only…
Part Number: PMP6776 Other Parts Discussed in Thread: TPS65400 , TPS53915 Hi,
We are using Kintex 7 FPGA: XC7K160T-1FBG676C in the current project. The power tree requirement for Kintex 7 FPGA is attached below. Q1. Please help us by providing the best…
Other Parts Discussed in Thread: TPS54620 , PMP6776 , PMP This ready made power module for Xilinx Kintex7 series FPGA is used as reference for designing the power supply portion of Xilinx Kintex 7 series FPGA based design. During Environmental stress…
Hi, I have several points to discuss about the power supply : PMP6776 . Actually I use this power supply to provide the necessary voltage rails to the Kintex 7 FPGA. When the power supply works in stand alone operation, I mean without any FPGA, all the…
Yes, the sequence of Vccint & Vccbram (1V) > Vccaux (1.8V) > Vccaux_io (2.0V) > Vcco is designed in PMP6776.
Please see the PMP6776 test report page 3 as follows:
http://www.ti.com/lit/ug/tidu046/tidu046.pdf
Regards,
Sheng-Yang Yu
Hi Jejomar,
I don't know what this is or why it is listed under the LDO group, but I thought I would take a try at this anyway.
It looks like this might have been made by Avnet but with two Texas Instruments power modules you can attach. From an internet…
Other Parts Discussed in Thread: PMP6776 Hi.
I built a scheme similar to the scheme PMP6776(Xilinx Kintex FPGA Power Solution).
I used part of this scheme - a chain of 3 chips TPS54425PWP (2V output), TPS56121DQP(2.5V output), TPS56121DQP(3…
Part Number: PMP7804 Other Parts Discussed in Thread: TPS56121 , , LMZ22008 I am using the kintex 7 mini module avnet design, i have customized the schematic according to my requirement, now i need to connect the power module for FPGA. i have found the…
