Hi Anber,
i believe for LDO, the power dissipation is fixed no matter you parallel one more or not in the power flow.
For LDO in parallel design guide, could you raise another E2E with this two LDO parts regarding their parallel operation. so an expert…
Other Parts Discussed in Thread: TPS84259 , PMP8372 On the PMP8372 board there is a 49.9 ohm resistor R11 in series with the Vset resistor R13 to ground for the TPS84259 minus out module. The junction is labeled Vs- and is connected to TP16. What is the…
Other Parts Discussed in Thread: PMP8372 , PMP , TPS84250 Hi all,
I'd like to know how i can modify this reference circuit to generate ±12Vdc with strict requirements as in the object of this post.
i have an istrument that require this type of PSRR…
Hi Uli B,
For Vin=9V to 40V and output of +15V, please refer to "Buck-boost" converters which can step up/down the input voltage top achieves desired output.
PMP8372 reference design | TI.com
AC/DC & DC/DC converters (integrated FET) product selection…
Part Number: TPS7A47 Other Parts Discussed in Thread: TPS7A33 , PMP Team,
Question about the TPS7A47/TPS7A33 LDOs used in https://www.ti.com/tool/ PMP8372 :
-Is it possible to use two TPS7A47 or two TPS7A33 in parallel to lower the current/power dissipation…
Hi JD,
Protection diodes should not be required. In fact if you are using TPS7A3301 and TPS7A4700 for their PSRR, such diodes would actually reduce the PSRR.
We have a reference design that may be useful to you:
http://www.ti.com/tool/pmp8372
…
Other Parts Discussed in Thread: PMP8372 , PMP Hello,
i've thought to open another post to better explain my intentions:
Is it possible to use single 24DC input to feed TPS84250EVM and TPS84259EVM and use their output to feed respectively TPSA4700EVM…
Other Parts Discussed in Thread: PMP8372 , TPS84250 , TPS84259 Hello,
i'm looking for an EVM with a DC input that must be capable to deliver ±12Vdc with PSRR ~100dB in 0-3Khz bandwidth.
I've seen PMP8372 module and it would be perfect but i've seen…