Thank you for the query about UCC28633.
I would suggest starting with the following reference designs to get started with UCC28630EVM-572 , PMP30092 & PMP9643 to start with in addition t o the specific ation from WEBENCH designer.
1. The above…
1. Power Supply Design for TIDA-00386 is based on another reference design PMP9643 http://www.ti.com/tool/PMP9643 .
You should find this document ( http://www.ti.com/lit/ug/tidu351/tidu351.pdf ) helpful in calculating the power factor.
I had a look at PMP9643, but that has a slightly lower power than I required, everything else is great. If I can simply increase the output power of PMP9643 from 65W to about 100W, that would exactly fit the requirement.
I follow very much…
Hi Sahil / Praveen,
In the TI reference designs, there's a shield "winding", especially looking at PMP9643. I think the shield winding helps reduce the capacitance between the primary and secondary, I suppose. Wonder whether adding such a setup would…
Other Parts Discussed in Thread: TIDA-00386 , PMP9643 Hi,
I would like to know the manufacturer part no. or complete electric & mechanical specification of the transformer part (RM10/I - P-1031 5-pin Bobbin Renco Electronics) used in this reference design…
Other Parts Discussed in Thread: PMP10804 , UCC28631 , UCC28632 , UCC28633 , PMP9643 , UCC28630 Below are the specs as tried to check from web that Ti does not have EVM available.
VAC: 110V ~ 265V
During no load, power supply should only provide…
Other Parts Discussed in Thread: PMP9643 , UCC28631 project details
input 60-201V line to line three phase at 30-106Hz
Expected bulk DC voltage is 78-261Vdc
output 24Vdc at 2A
Primary side regulated off-line converter
I made a schematic from PMP9643 and…
Other Parts Discussed in Thread: UCC28630 , UCC28633 , PMP9643 , UCC24650 I am working on a new project where i need a dual SMPS power supply with fly-back primary side regulation - 24V@5A and 12V@1A.
I couldn't find any reference design on TI website. Please…
Part Number: DRV10983 Flyback Transformer Datasheet Discrepancy
I am working on a BLDC motor driver using the DRV10983. In the application note it refers to a transformer that is used in the AC-DC to generate 24VDC from AC mains input. Here is…