Search tips
Showing 21 results View by: Thread Post Sort by
    Answered

  • TINA/Spice/PMP9772: PMP9772 SIMULATION

    Resolved
    Part Number: PMP9772 Other Parts Discussed in Thread: TINA-TI , , TPS61088 , TLV61220 Tool/software: TINA-TI or Spice Models Hello sir, I want to simulate this PMP9772 design in TINA TI. Can i get tina model of this design?
    • Resolved

  • PMP9772: Maximum output voltage and current capapility?

    TI Thinks Resolved
    Part Number: PMP9772 Other Parts Discussed in Thread: TPS61088 , , TPS40210 , TPS43061 Hi TI, TPS61088 can give 12V,4.7A (56 W) output at 60 degree celcius for input range 6V - 8.4V (according to WEBENCH designer). But our input range is 2.5V-4.2V and we…
    • Answered

  • RE: LMR64010: Operation with higher boost input voltage

    Resolved
    Hi Micah, The chip can be set with the separate supply, but LMR64010 is old chip, TPS61170 is relatively new. You can refer to the below app note and design which extends the input voltage. http://www.ti.com/tool/PMP9772 BTW, if the package is not required…

  • TPS61088: Low input voltage and high current compatibility

    TI Thinks Resolved
    Part Number: TPS61088 Other Parts Discussed in Thread: PMP9772 , Hi, TPS61088 can give 12V,4.7A (56 W) output at 60 degree celcius for input range 6V - 8.4V (according to WEBENCH designer). But our input range is 2.5V-4.2V and we want to drive around 30W…
    • Answered

  • RE: TINA/Spice: DC DC converter

    Resolved
    Dear Sir, Please check the attached PMP9772 sch, the output of TLV61220 connect to the Vin pin PMP9772 schematic.PDF of TPS61088, not gnd.

  • RE: TPS55340: support input voltage to 2.7V

    Hi Brian, Thanks for the update. Then TI design PMP9772 is just fit for your application. As there's a tiny boost to supply the Vin pin, so this TI design can support Vin low to 0.7V. Please read the PMP9772 carefully. What is the Vo, Io in your application…

  • WEBENCH® Tools/TPS61022: TPS61022 part WEBENCH problem

    TI Thinks Resolved
    Part Number: TPS61022 Other Parts Discussed in Thread: TPS61088 , TPS61021A , TIDA-050021 , PMP9772 Tool/software: WEBENCH® Design Tools hello, we have a design for below requirement for Boost application. input voltage: 3.3V to 4.2V Output voltage: 4V …
    • Answered

  • RE: LM5155-Q1: efficient boost

    Resolved
    Hi Uri, you need two boost converter. one is TPS61088 for 2.5V to 12V power converting. the other is TPS613222A for the control circuit of the TPS61088. The schematic is similar to this reference design. But change the output to 12V. http://www.ti.com…
    • Answered

  • RE: TPS61021A: TPS61021A output

    Resolved
    Helen-san, Thank you so much for your advice. I will introduce PMP9772 and confirm the schedule at the customer side. I may ask you on-line. Best Regards, Akihsia Tamazaki

  • RE: TPS63070: TPS63070: Max Duty Cycle not specified? Also, WEBench appears to be wrong.

    Hi Adam, as the input voltage is always lower than VOUT, boost converter should be better solution. However, there is not a boost can work on this application as the input voltage is down to 2V and VOUT is up to 6.2V. we have TPS61022 support this power…

Didn't find what you are looking for? Post a new question.