Part Number: PSIEVM For the PSIEVM is it able to output DC - non sinusoidal signals (i.e. 0 Hz ) ?
What is the smallest possible differential voltage Vpp the PSIEVM output ?
What is the resolution of the voltage Vpp the PSIEVM output ? i.e. what is the smallest…
Part Number: ADS8900BEVM-PDK Other Parts Discussed in Thread: ADS8900B Hi Team,
My customer is working with the ADS8900B EVM and is now doing evaluations and ran into a few questions. With the PSI-EVM, will it only offer a 2-kHz input signal? He's noticed…
Thanks your so much detail advice.
I have apply the PSIEVM and DIP-ADAPTER-EVM according your recommend, will setup test platform to re-verify ADC performance after receive kits.
Since kit setup still need wait some time, if you already have been…
No, SMA-to-SMA cables are not included with the ADS8900BEVM-PDK kit. However, if you order the optional PSIEVM to use with the ADS8900BEVM, this kit does include 2 SMA-to-SMA cables.
Regards, Keith Nicholas Precision ADC Applications
Part Number: ADS8339EVM-PDK Other Parts Discussed in Thread: PSIEVM Hi Team,
My customer tested the ADS8339EVM and found that the SNR and THD were not good (80 and -74 dB, respectively)
The input signal source is the PSIEVM. Below is the test setup
I probably could have explained this better. The better way to calculate system SNR is to use the maximum full scale range of your input signal, not the measured value. If you just want to determine SNR for the ADC, then you would use the full…
For testing the ADC I recommend using the following signal injector EVM from TI http://www.ti.com/tool/PSIEVM I have used this to replicate the DS numbers for both 12-bit and 16-bit modes of this ADC.
The output of the PSIEVM is SMA which is also…
There is nothing different in the chip about ADC-D. You can use ADC-D in single-ended mode and you can use ADC-A, B, or C in differential mode.
If you want to use ADC-D to sample a single-ended signal, just hook your signal up to one of…
Hi TI Team,
Sorry, I was not read the datasheet of PSIEVM . Just now I read it and I get to know this kit can be used for SAR based ADC's. It can be used to give Single ended as well as Differential signals.
Correct me if I wrongly understood
Part Number: ADS8900BEVM-PDK Other Parts Discussed in Thread: PSIEVM , ADS8900B Hello,
We want to evaluate ADS8900BEVM-PDK while having the following questions
1, We can not find a link at TI official site to purchase PSIEVM, can you direct?
2, when evaluate…