Other Parts Discussed in Thread: PTH04T230W In the datasheet for the PTH04T230W, Figure 4 on page 9, states that;
A Safe Operating Area (SOA) curve. Any condition below the line is safe to operate the module. The flat line at 85C means that you get…
Part Number: PTH08T241W Other Parts Discussed in Thread: PTH04T230W , Hi E2E,
For the PTH04T230W and PTH08T241W is the DC bias derating is considered in choosing the capacitance values given for minimum capacitance and TurboTrans capacitance? Regards…
Guy:
I reviewed the data above.. The scope bandwidth reommended for ripple and extraneous noise measurement is not more than 20MHz . The scope in this data is detecting E field noise ( which is not actual present on the output bus.
PTH04T230W at 0…
Guy: This TT selection is in line with the turbo trans data.
PTH04T230W with 680uF x 2 ESR 4 mΩ each , 1.5A transient response with 3.57kΩ Rtt= 3.57 kΩ= 18.5mV .
3 x100uf ceramics will reduce sinsodial ripple ( 20MHz scope) at 300KHz 14-16mV. Peak…
