Part Number: PTH04T240W Tool/software: Hello, I asked to TI about the minimum feature size of PTH04T240WAZ (see case CS2429751) because TI support personnel answered that the feature size is multiple.
Can you provide the smaller value of the multiple…
Part Number: PTH04T240W Hi sir,
Is the required output capacitors needed by the PTH04T240WAD have to be near by? Can I use the caps required by the FPGA to satisfy PTH04T240WAD need? The PTH04T240WAD is about is 5 inches from the FPGA capacitors.
…
Hi Madhuri,
Since these are older "plug-in-power" modules, there have not been any upgrade to this specific device that are direct "drop-in replaceable".
However, perhaps you can look at the PTH04T240W as a starter since it has the following features…
Other Parts Discussed in Thread: PTH04T240W , PTH08T230W Do TI has another power supply structure for XC5VLX85 FPGA excpet using PTH04T240W, PTH08T230W modules?
Thanks.
Other Parts Discussed in Thread: PTH04T240W , TPS51315 , TPS54383 , TPS55383 Hi ,
One of my customer ,want to design the power tree for below input rail requirement Please check it out to suggest the best device from TI / NSC.
1. input 1 (3.3 V…
Hi Jojo,
Please see the link below to the product page.
http://www.ti.com/product/pth04t240w
At the bottom there is a section on CAD/CAE symbols and a instructions to acquire the desired symbols and footprints.
Regards,
Darwin
The power modules including PTH04T241W published thermal data (SOA) under the product specification.
The thermal data is at natural convection no air flow versus output current at any output voltage.
The maximum ambient operating temperature is 85…
Yes, we do have higher current modules in our PTH family.
PTH04T240W; 2.2V to 5.5V input, 0.7V to 3.6V output, 10A
PTH04T220W; 2.2V to 5.5V input, 0.7V to 3.6V output, 16A
PTH05T210W; 4.5V to 5.5V input, 0.7V to 3.6V output, 30A
PTH08T250W; 4…
Alex:
PT08T241W all ceramic capacitors has turbo trans table ( page19) specification Type A-ceramic capacitor .Page 19 . attached
1. The individual ceramic capacitor Type "A" "C" and " ESR" in figure 10 note is as you stated. calculation 100uF х 2mOhm…
Pages from PTH04T241s Type A capacitors ceramic specification c pth04t241w[1].pdf
