Part Number: PTH08080W Hello,
We have a customer who is asking the following:
"I am looking for any documentation in regards to clean-ability of PTH08080WAH. Specifically chemicals that can be used, washing method (ie ultrasonic), and any drying procedures…
Hi Tom,
Thanks for reply
Could you please tell me about the PTH08080W circuit compliance with EMI/EMC conducted emission test as per CISPR 22 standard?
The document you have sent previously for the reference indicates the circuit complies with…
I'm wondering if a capacitor with a smaller footprint will work for me. This one is 100uF, 25V, but current ripple is only rated at 600mA... http://www.digikey.com/product-detail/en/EEE-FPE101XAP/PCE4546CT-ND The PTH08080W datasheet specifies 650mA current…
Other Parts Discussed in Thread: PTH08080W Hi
I have designed a small 5V Power Module using a PTH08080W Module.
PTH08080W is showing strange behavior, whenever I turn on the power supply (~11V), the output instead of quickly going to 5V, slowly…
I am using this for 5.0v output and with no (zero) load I measured 26mA of quiescent current.
a) Is this normal ?
b) How does this current change as load increases up to 2A (5v output) ?
c) Is this quiescent current counted in the efficiency…
Other Parts Discussed in Thread: PTH08080W , PTN78020W , PTH08T231W Hello,
We are considering using your PTH08080W module to power the Iridium 9602 satellite transciever. The power supply requirements for the Iridiums are:
(11 to 15 VDC Input, 5VDC…
Other Parts Discussed in Thread: PTH08080W Hello
Can I put EMI filter before PTH08080W? I want to put GAIA EMI filter FGDS-2A-50V to meet MIL-STD-461.
Generally the suggestion is to use GAIA DC-DC converter and use common mode noise capacitor between…
Other Parts Discussed in Thread: PTH08080W Is there any reason not to put two PTH08080W on the same pcb sharing the same input voltage (but not the output) ?
