TI has two modules which will meet your requirements. You did not mention the ambient temperatures or air flow in this application.
A. 12V in and 5V out at 4-6A
1.PTH08T230WAx up to 6 amp module for 5Vout with 100LFM air flow and 85°C at 6amp. If…
Hello, I am using the PTH08T2xx series of devices in a Xilinx Virtex6 design and would like to drive the Smart Sync from the FPGA.
To do so the PTH08 must startup in free-run mode (300kHz) and then once the FPGA is loaded it would drive the Smart Sync…
I'm using several PTH08T2xx modules in my design, which include one PTH08T210 that doesn't have SmartSync. Does it still benefit if I enable SmartSync on other modules (PTH08T220/PTH08T230)? In the datasheet of PTH08T210, I see such a mixed design (Fig…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
Peter,
i am enclosing the Power Management Guide for 2011. The section you will be interested in starts on page 43 and actual devices listed on page 46, With the minimum information you have given me I would expect that you will want something like…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
