Part Number: REG710-5 Hello,
Is the meaning of "NA" in part name for REG710NA-5? In the web page ( https://www.ti.com/product/REG710-5?keyMatch=REG710-5&tisearch=search-everything&usecase=GPN) is only name REG710-5. I would like to know if it exists…
Part Number: REG710-5 Hey DC/DC Regulator team,
I have a customer working with the REG710 in a design and we have a question about whether the device can withstand a certain test condition. Please see below!
We are using the REG710 for a 3.3V to…
Part Number: REG710-5 Hi,
One of my customers is looking for a TINA model for a REG710NA-5/3K. Any chance we have an old one in the back room?
Barring TINA, do we have a pspice version. I looked and could not find one in my install.
Thanks!
Part Number: REG71050 Other Parts Discussed in Thread: REG710-5 , REG710-3 , TPS61299 Hello,
I'd like to use the REG71050 for boosting an input that ranges between 1.8 V and 3 V. The dataheet table for input operating voltages, table 7.3, indicates…
Hi Handi:
As there is little data in my hand, and no EVM to verify, I hard to explain the behavior under such condition.
I have done a test based on REG710-5, which is similar to REG711. It could generator the Vout around double Vin when Vin is 2V…
Other Parts Discussed in Thread: REG71050 , REG71055 , REG710-5 Let me ask about REG71050.
Is the input voltage range of this IC 2.7V?5.5? I contributed, in order that there might be no statement in a data sheet.
yusuke
The TPS60400 is a voltage inverter, and will not help you get a boosted voltage. To boost from 2.5 V to 3.3 V, use something like the REG710-33. For 5 V, use something like the TPS60140.
What is the voltage at the LDO's input? Would it be possible to…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
Siyu,
I think the toggle flip-flop in the block diagram on page one of the spec should have let you know that the max you will get with this device is 50% duty.
Go to page 43 and 44 of the attached and select a more suitable part.
