I have looked through your settings and they differ somewhat from our recommended settings in SmartRF Studio, with respect to FSCTRL1 and DEVIATN. I would recommend to use the settings recommended by Studio unless there are good reasons for changing them…
You can use: www.ti.com/.../rf-range-estimator to see how the radio parameters impact on the expected range. Typically a 6 dB difference in link budget is x2 in range.
From the numbers presented it looks like you need to look into the sensitivity on…
Hi,
Piyush Saxena45 said: 1) In my application I am looking for a possible max line of sight distance of around 100m between the drivers Tablet and my end node. Please let me know if the Long range Coded Phy support these distances without any issues…
1) 4 Mbps is not possible on 433 MHz. This datarate is only possible on 868 MHz. But up to ~1.5 Mbps is possible.
Does that mean that the existing SX1212 module is limited to 200 kbps?
2) "the same frequency interference is more serious": Could…
Hi Tess,
For size, please consider the new SIP modules: https://training.ti.com/sites/default/files/docs/npu_simplelink_jan2020.pdf You can use the RF-RANGE-ESTIMATOR to determine feasible communication distances, Sub-1 GHz solutions will have more…
If you have space I would go for DN024 since DN038 is dependent on the board thickness (The vias in the antenna is part of the antenna length and hence the antenna length will change if the board thickness change)
I assume that a gate/ door could contain…
Range tests are difficult in the sense that they are hard to replicate. If you select a different place to do the test it could be that you get a different result.
- Background noise: At some locations the noise on the channel used is fairly high which…
When operating at 433 MHz and using the 50 kbps settings, you should be able to have a range of about 750 m (Please see our range estimator: www.ti.com/.../rf-range-estimator ). If you are only getting around 80 – 100 m with your boards, I think you need…
Hello,
Please refer to the RF Specification section in the datasheet. We do not mention 'dynamic range' because it can have different meaning in different context. You can estimate the range you wish using the given RF parameters. We do not have any…
I see that more of less all wireless flash triggers operates on 2.4 GHz (found this when I was looking for what the normal range is: www.topbest10reviews.com/.../ ) and using this frequency band makes it easier to make a world wide product.
To estimate…