Part Number: CC2745R10-Q1 Other Parts Discussed in Thread: SYSCONFIG Hi team,
SDK: 9.140.1.16 Target: CC2745R10
I am working with the channel sounding example: car_node_LP_EM_CC2745R10_Q1_freeRTOS_ticlang
I have a few specific questions:
1.…
Hi Puneet,
The device is rated for 800mA up to a temperature of 125'C . Once the chip gets hot enough to exit the temperature aspect of its rating, it is out the applicable range for 800mA rating too. The LDO can heat itself up past this point, so there…
Part Number: MMWCAS-RF-EVM Other Parts Discussed in Thread: AWR2243 , AWR2243-2X-CAS-EVM , TIDA-020047 Tool/software: Hello,
I am currently searching for a long-range radar solution for my new project (specifically for detecting objects with low RCS…
Part Number: AWR6843AOP
Hi Expert,
Below are the TI built-in testing features, customer found that are available (recommended for production lines). We need your help to support our customers' software.
Additionally, besides the SDK, are there…
Hi Abigail,
1) Dropout is linear with output current here; you should be able to scale back the 420mV limit linearly from 800mA to your expected load (0.465V/0.8V*0.42V=244mV) to estimate an upper bound on dropout voltage. The dropout voltage is essentially…
Part Number: AWR1843AOPEVM I read errata sheet:
Description: When the instantaneous FMCW Ramp frequency nears certain specific RF frequencies, there can be coupling between the synthesizer's reference and its output, and manifest as frequency glitches…
Hi Byron,
Byron Loader said: We are operating it at 5V We get decent range on ICLASS and Mifare Tags,
Is this the iCLASS standard (Legacy) you are referring to? I'm not familiar with all different types of iCLASS cards. My understanding is that iCLASS…
we are developing a new hardware so we are engaging with TI's IWRL6432AOPEVM to use for applications we need to customize parameters like sweep bandwidth , IF , FFT size etc so before all this we need only 1 tx and 1 rx to detect only the target's range…
Hi Sam,
The value of the series resistor on IN+ depends on what the input signal looks like. Typically, RC filters on the input use a resistor between 1k and 10k, and a cap between 1nF and 100nF (this is just an estimation, you will need to evaluate…
Part Number: LAUNCHXL-F28P65X I am trying to generate MHz(nearly 5 MHz) range PWM for a (open-loop currently) phase shift full bridge converter or a push pull converter to build a RF power supply. Need more control over the phase-shift hence, need high…