Part Number: RI-STU-MRD2 Other Parts Discussed in Thread: MRD2EVM Dear Texas Instruments Support Team,
I am currently integrating the RI-STU-MRD2 module (based on the MRD2EVM evaluation platform) into a commercial product intended for the European market…
Part Number: RI-STU-MRD2 Other Parts Discussed in Thread: RI-SMD-MRD2 Hi experts,
Could you please tell me the current status of RI-STU-MRD2/RI-SMD-MRD2? ACTIVE? NRND? EOL?
I couldn't find out how to purchase on TI.com. (No cart or stock displayed…
Part Number: RI-STU-MRD2 Hi, we purchased a new RI-STU-MRD2, connected on a circuit on which there was previously an old RI-STU-MRD2, with these configurations:
RDEN = low CRDM = low WLSC = high
RESET = not connected
communication via serial port…
Part Number: RI-STU-MRD2 Hello,
In this link: www.ti.com.cn/.../RI-STU-MRD2
17 pages of the user guide, No schematics for RI-STU-MRD2 DIL MODUL;
Can you provide a schematic of RI-STU-MRD2 DIL MODUL?
Part Number: RI-STU-MRD2 Other Parts Discussed in Thread: RI-SMD-MRD2 ,
Hi,
The thread below mentioned "the RI-SMD-MRD2 and the RI-STU-MRD2 are functional the same. The difference is only in the size and in the way the module can be contacted (SMD…
Part Number: RI-STU-MRD2 Dear Sirs, we are in the process of replacing the old RI-STU-MRD1 with the compatible RI-STU-MRD2. We replaced the MRD1s with a couple of MRD2 samples that we had in the drawer for a long time (unfortunately, I can't say how long…
Part Number: RI-STU-MRD2 Other Parts Discussed in Thread: RI-TRP-DR2B , MRD2EVM Tool/software: Hi,
1. "The USB reader-writer stick contains the RI-STU-MRD2 DIL module, which is mounted on an antenna base board with a USB connector and a selection of…
Part Number: RI-STU-MRD2 Other Parts Discussed in Thread: RI-SMD-MRD2 Hi
My customer is using RI-STU-MRD2.
And RI-SMD-MRD2 is using as buck up part number.
Is there anything else production that can use as buck up of RI-STU-MRD2? Thanks,
GR
Part Number: RI-STU-MRD2 Hi i have a few questions regarding frequency change on Microreader RI-STU-MRD2
In the document scbu049: 6.4.3.26 Execute C-Trimming (Command 0x43)
This command starts a C-trimming sequence to adjust the transponder resonance…
