Part Number: TPS62442 We would like to request a design review for the power section. Kindly share your review comments at the earliest possible. TPS62442RQRR -1.2V and 1.8V.pdf
Part Number: LM51571
Hello, We are using the LM51571RTER in our design. In our schematic, we have left the PGOOD pin open. Is this acceptable? I have also attached the schematic file—could you please review it and suggest if any changes are required…
Part Number: TPS53353
I am designing a 12 V → 5 V, 10 A buck power supply using only ceramic output capacitance and the TPS53353 family (or an equivalent DC-DC with ripple-injection). Key requirements and design choices:
Vin: 12 V
Vout:…
Part Number: UCC28951 Other Parts Discussed in Thread: UCC28180 , , UCC28180EVM-573 , UCC27714EVM-551 Hi,
I am creating a AC/DC power supply module taking in line voltage 230Vac A 50/60Hz and outputting 48Vdc/10A continuous. The high level architecture…
Part Number: LM25143-Q1 Hope a design review for this part, Some topics of particular concern
Working status: Input 12V(typ), Output 3V3, current load max 24A.
1.Do i need R06022,C06010 and R06028,C06035 ?
2.MOSFET Snubber Components R06012,C06018…
Part Number: DRV8353 Tool/software: Hi Team,
The customer is using an open source motor driver board which is based around the DRV8353S Motor Driver for controlling BLDC Motors. In the POC System we had built using this board, we have seen a lot of…
Part Number: LMQ66420 Other Parts Discussed in Thread: LMR66420 Hello,
Please could you do a schematic review of our LMQ66420 design? I've attached the WEBENCH design, and our schematics.
The design parameters are:
+12V Input
+1V8 Output
2A…
Part Number: TPS7A57 Tool/software: Hello,
My customer requested a review from TI for their TPS7A5701RTER design below.
Please review the circuit design to see if there are any problems.
TPS7A5701RTET SCH.PDF
Thank you.
JH
Part Number: LP8868V-Q1 Hello TI Support Team,
I am designing a backlight driver for a display that requires approximately 27 V @ 280 mA.
The desired input voltage range in my system was 5 V to 40 V. After reviewing several options, I found that the…
Part Number: ISO1042 Other Parts Discussed in Thread: SN65HVD230 Tool/software: Dear Technical support,
following a previous thread on this forum ( https://e2e.ti.com/support/isolation-group/isolation/f/isolation-forum/1433410/iso1042-connection-issue…
