Part Number: SIMPLICITI
Tool/software: Code Composer Studio
I am using EZ430-RF2500 and am very new to RF communication and SimpliciTI. From my understanding of the given example code, an End Device radio goes through three steps - join, link and TX…
Part Number: TMS320F28388D Other Parts Discussed in Thread: SYSCONFIG Hi there,
While configuring any GPIOs in SYSCONFIG, I am not able to see GPIOs PIN numbering, instead it shows the CPU PIN number.
I need GPIOs numbers or both to be seen for simplicity…
Hi Go,
Do you have a schematic to show how the nodes are constructed? I want to verify all bus connections to see if the bus could be overloaded from other sources.
Also how long is the bus between start and end nodes?
While this device can support…
Jan,
Thanks for the followup. I don't know why I didn't get an email notification or I would've replied sooner...
Yes, I had modified "profile files" simple_gatt_profile.h/c, and also app_simple_gatt.c, from the basic_ble example…
Hello Star, If the customer uses fixed EDV mode, they should not be using the GPCCEDV tool. This tool is for when the Compensated EDV feature is used. For simplicity, it is best to input manually the Voltage % DOD in the CEDV Profile. This can be obtained…
Hi Zeki,
Following up, increasing the working voltage such that lifetime = 37.5years would yield ~1280Vrms. Selecting 1200Vrms was done for simplicity.
Lu Zhang said: Could you please correct me if my thoughts are wrong?
Yes, there is a chance of overflow if there are too many bright pixels.
Lu Zhang said: I find that the bit depth of luminance statistics in AE is 8 bit, and before AE the bit depth of…
Part Number: LM5060
Hi there,
We are experiencing problems using LM5060s for enabling/disabling power to our motors.
VIN is 25V from a well-charged 24V battery
OUT is connected to 5 of these motors: mjbots.com/.../moteus-r4-11
OVP and UVLO are configured…
Hi Ryan!
Thanks for you reply!
Regarding the issues with Simplicity/TIRTOS/CC2642R, folow:
Which SimpleLink CC13XX / CC26XX SDK version are you using?
CCS 12.30
What example project from the SDK did you reference as a baseline?
Started from Project…
Good day Manikanta,
I am going back to the UCC25600.
As I said before in a previous thread on E2E, I have had 3 very successful designs so far with the UCC25600.
The beauty of the UCC25600 is its simplicity and the fact that one can see the waveforms…