Part Number: SM72295 Hello,
I referred SLAA602A application report to make an 850VA inverter. The gate pulses were generated using Atmega 2560 microcontroller. Obtained pulses were good and the driver SM72295 works fine. The output filter capcitor used…
Part Number: SM72295 Other Parts Discussed in Thread: TIDA-00120 Hi,
SM72295 can support buck or boost mode, but I am not sure if it can support buck-boost mode, could you please help confirm?
another question is about dead-time, is dead-time just…
Part Number: SM72295 Other Parts Discussed in Thread: TIDA-00120 , MSP430F5132
Dear sirs,
I have a problem with SM-72295..The signals LIA,HIA,HIB,LIB at pins 6,7,8,9 is ok, but I have no output at HOA ,LOA,LOB,HOB, at pins 27,24,22,19...VDD=3.5V,…
Hi Cem,
thanks for the update, take your time getting the board up again.
from the waveform you sent the signal at first appears to look ok (with some dead-time). However when I see the reference of the waveforms I can see that they go negative and…
Part Number: SM72295 Hello,
I am getting an issue in some cases, The output of HOA is getting distorted same as HBA and HSA , not getting proper ground . and after replace of SM72295 HOA output is getting proper ground.
Part Number: SM72295 In the process of using 72295, I have encountered a situation in which one of the driver outputs is abnormal. It is usually HOB (PIN_19). It is normal at the beginning, and this happens during the running debugging. Do not know what…
Part Number: SM72295 Other Parts Discussed in Thread: SM72445 , Hi! I'm working on a design with the SM72445 and SM72295. Can the driver handle different mosfet types on high and low side? I'm thinking of optimizing the low side mainly on switching behaviour…
Part Number: SM72295 Other Parts Discussed in Thread: INA213 , INA240-Q1 , INA240 Hello,
We have developed DC-DC Boost Converter in Current Controlled Mode, based on "SM72295 data sheet - Typical Application Circuit" with interface TI TMS320 microcontroller…
