Hi,
For intial evaluation of the RF performance and choosing PHY settings it is recommended to use an XDS110 debugger ( https://www.ti.com/tool/LP-XDS110 ) with SmartRF Studio 7: https://www.ti.com/tool/SMARTRFTM-STUDIO
This helps isolate just the RF perfomance…
Hello Renan,
Since myself and other subject matter experts have never encountered this issue with SMARTRFTM-STUDIO, I can only suggest that the problem involves their Windows OS and recommend they return with any further debug information they may be…
Part Number: SMARTRFTM-STUDIO I am using the RF Smart Studio and I setup a custom target configuration which I use over and over on my PC, but I want to transfer this configuration to other test computers that are running RF Smart Studio. How do I do…
Hi,
Yes this is definitely possible, the customer must use the same PHY settings for TX/RX on both devices. For this purpose, they can test just the radio settings using
SmartRF Studio 7: https://www.ti.com/tool/SMARTRFTM-STUDIO
Regards,
Zack
Part Number: SMARTRFTM-STUDIO Other Parts Discussed in Thread: CC1101 I'm trying to talk to a CC1101 module with Smart RF Studio, via a USB SmartRF04EB… but it's not working for me yet
More detail: I'm using SmartRF Studio 7, under Windows…
Part Number: SMARTRFTM-STUDIO Hello,
Is it possible to change the behavior of the open configuration dialog for smartRF studio? Right now it defaults to some User\Texas Instruments directory, but I have several customers who would like to manage their…
Hi Mark,
They should refer to SWRU321 instead and comment on USB drivers, SMARTRFTM-STUDIO version, PC OS version, and SmartRF06EB jumper positions.
Regards, Ryan
Hi,
This should be possible using SmartRF Studio 7: https://www.ti.com/tool/SMARTRFTM-STUDIO
You can set TX frequency to be swept in SmartRF Studio 7 under the "Continuous TX" tab; you would then need to manually set the RX frequency. You can then iterate…
Part Number: SMARTRFTM-STUDIO Other Parts Discussed in Thread: CC1352R Hi all,
Why are the Sub 1GHz frequencies not available to select on 15.4 mode in smartRF Studio 7? WMCU = CC1352R
Hi,
For initial RF evaluation, please use SmartRF Studio 7: https://www.ti.com/tool/SMARTRFTM-STUDIO to set the device to transmit a continuous (unmodulated) carrier wave.
Are you using a TI LaunchPad for these measurements?
Regards,
Zack
