Search tips
Showing 58 results View by: Thread Post Sort by

  • SMARTRFTRXEBK: I need the schematics of the SmartRF Evaluation Board.

    TI Thinks Resolved
    Part Number: SMARTRFTRXEBK The RF Board schematic is available online but, the main evaluation board schematic I am not able to find anywhere. I wanted to see the UART connections and make some connections based on the schematics. So, if u can provide…
    • Answered

  • SMARTRFTRXEBK: The board will not detect the radio chip inserted

    Resolved
    Part Number: SMARTRFTRXEBK Hello. I've got two TrxEB development board with a 868 MHz radio. One of the boards will not detect a inserted radio chip. The LED above the enable/disable switch i just blinking. When i connect to the SmartRF Studio app the…
    • Resolved
    • Answered

  • SMARTRFTRXEBK: Change PER radio parameters using SmartRF Studio for range testing

    Resolved
    Part Number: SMARTRFTRXEBK Other Parts Discussed in Thread: CC1101 , CC1190 We are using the CC1101/CC1190 combo as our mesh network wireless connection. I would like to do some range testing using the TRxEBs powered by batteries. The default PER test only…
    • Resolved

  • SMARTRFTRXEBK: Does SMARTRFTRXEBK support CC2500EMK?

    TI Thinks Resolved
    Part Number: SMARTRFTRXEBK Other Parts Discussed in Thread: CC2500 , , CC2500EMK , CC1190 Does the SMARTRFTRXEBK support CC2500 Evaluation Module?. In the Description section of the SMARTRF Board, it is shown as CC2500EM is being supported however, in the …

  • SMARTRFTRXEBK: Can you log data from CC1120 TrxEB PER test to PC?

    TI Thinks Resolved
    Part Number: SMARTRFTRXEBK Other Parts Discussed in Thread: CC1120 Is it possible to perform a PER test across two CC1120 TrxEB devices with complete data logging of packet success/fail and RSSI where one device is connected to SmartRF studio and the other…
    • Answered

  • SMARTRFTRXEBK: TRXEB USB interface dies

    Resolved
    Part Number: SMARTRFTRXEBK Other Parts Discussed in Thread: CC1200 , CC-DEBUGGER This is the second Eval board that dies over night. I am running a repeated PER test for CC1200 using the Perl APIs provided with this board and after a few hours the board…
    • Resolved
    • Answered

  • CC1101CC1190EMK868: integration with SmartRF Transceiver Evaluation Board (SMARTRFTRXEBK)

    Resolved
    Part Number: CC1101CC1190EMK868 Does the CC1101-CC1190 869 MHz Evaluation Module Kit (CC1101CC1190EMK868) work with the SmartRF Transceiver Evaluation Board (SMARTRFTRXEBK)? Thanks, Richard
    • Resolved

  • SMARTRFTRXEBK: Possibility of flashing settings on SmartRF software onto the board

    TI Thinks Resolved
    Part Number: SMARTRFTRXEBK Hi, I am currently using the SmartRF software along with the TrxEB board. Every time i need to be using it, i am having to put in the required settings onto the SmartRF software, so need to have the board connected to the laptop…
    • Answered

  • SMARTRFTRXEBK: Driver not recognized

    Resolved
    Part Number: Hi to all! I have full installed SmartRF Studio, but it doesn't recognize my board. The board is Transceiver Evaluation Board SmartRF TrxEb PCB rev 1.7. I put the jumpers in USB and LCL and set the switches of USB mode in Enable and SmartRF…
    • Resolved

  • SMARTRFTRXEBK: RSSI and AGC

    TI Thinks Resolved
    Part Number: SMARTRFTRXEBK Other Parts Discussed in Thread: CC1120 Hi, I want to know how the RSSI is calculated in SmartRF Studio, and how changing the AGC register values can alter this calculation. It would also be good to know how IF ought to change…

Didn't find what you are looking for? Post a new question.