Part Number: SN55LVCP22-SP Tool/software: SN55LVCP22-SP is a LVDS output. Can its output be terminated with a 150Ω or a 200Ω load (parallel resistor btw out+ and out- )? I would think so, just double checking. Based on the datasheet, I interpret its current…
Part Number: SN55LVCP22-SP Tool/software: Hi,
I am going to use the LVDS Cross Point switch Part SN55LVCP22W/EM, In specification given as Peak to Peak common mode voltage typical voltage is 50mV.
I am assuming this is change of voltage Peak to Peak…
Part Number: SN55LVCP22 Our customer needs to find a solution for transferring LVDS to TMDS. Is there a scheme recommended? It can be realized by combining several ICs.
Part Number: SN55LVCP22-SP
For LVDS inputs, does the SN55LVCP22-SP contain internal 100 ohm diff resistors?
Are the inputs failsafe and cold-spared protected?
thank you,
Rajan
Part Number: SN55LVCP22-SP Team,
The data sheet for the SN55LVCP22-SP only specifies a minimum frequency of 1 GHz. What is the max operational frequency? Can it run at 3.125 GHz?
http://www.ti.com/product/SN55LVCP22-SP
Part Number: SN55LVCP22-SP The receiver specifications give a combination of min and max threshold voltages, along with a max hysteresis, that I do not know how to interpret.
Does this mean that if I measure the thresholds for my part, and VTH = 80mV…
Part Number: SN55LVCP22-SP Hi E2E,
Good day.
Our customer is requesting for the junction-to-lead or junction-to-board thermal resistance of 5962-1124201VFA. The datasheet only contains theta JA and theta JC.
Thank you in advance for your assistance…
Part Number: SN55LVCP22-SP Other Parts Discussed in Thread: SN55LVCP22 Hello Team, Customer is requesting for return loss of this part. Please help provide data. Thank you!
