Hello Andrew,
thank you for your answer, 100pF is really low (I am not sure if this will help), but I will check the time, with 10nF it was lower then 20us.
Best regards
Michal
Part Number: SN6507DGQEVM Other Parts Discussed in Thread: SN6507 Hi Team,
We are using SN6507DGQR this part in our design and used as per the recommendation in the datasheet to get the VOUT=24V using Vin=24V., but we see an issue in the output voltage…
Part Number: SN6507DGQEVM Other Parts Discussed in Thread: SN6507 , Dear Sir,
I would like to use SN6507 to do the following:
1) Input Voltage = 9.5 V
2) Output Voltage = 15 V
3) Output Current = 0.4 A
I have the SN6507DGQEVM, to achieve the above, do…
Part Number: SN6507DGQEVM HI,
Can you please review the below SN6507DGQR schematic which is designed for the below specification.
VIN-24V
VOUT-24V
IOUT-100mA
Regards,
Chitharanjan M
Part Number: SN6507DGQEVM Hi team,
I help the customer ask a question.
"I would like to use SN6507DGQ TI IC since they are currently available in the market fit for my project. I am looking for the SN6507DGQEVM PCB design files and Schematic design files…
Part Number: SN6507DGQEVM Other Parts Discussed in Thread: SN6507 Hello,
I am using the SN6507 EVB of the push pull converter.
Circuit parameters:
1. frequency is 150kHz (Rclk=82kohm)
2. ILIM resistor is 18k (1.3A)
3. Input voltage is 12V
4. Output voltage…
Part Number: SN6507DGQEVM Other Parts Discussed in Thread: SN6507 , Hello
I want to design a +-15V circuit with 18~30V(24V) input using SN6507.
SN6507DGQEVM is used, all functions except DC function are set to default, and j7 and j12 jumpers are removed…
Hi!
I tried with 400 kHz but only a small decrease in current consumption. I will try with a different transformer and compare to the SN6507DGQEVM evaluation board. Signals seems to look fine with minimal ringing.
Regards,
Bo Stångberg
Part Number: SN6507-Q1 Other Parts Discussed in Thread: SN6507 , SN6507DGQEVM I am trying to design a power supply using SN6507 with the following specification.
Input – 8V to 16V
Output Voltage – 15V
Output Current ~20mA
I tried testing this…
Hi Darek,
Welcome to TI E2E forum!
Thank you for reaching out and sorry to hear that your design is not working. The application schematic of SN6507 with duty cycle control enabled is provided in Figure 8-3 and Figure 9-4 of SN6507 datasheet, I am copying…
