• SN65EPT22: SN65EPT22 Pspice Model

  

  Joel Harms

  TI Thinks Resolved

  Part Number: SN65EPT22 Hello, I am looking for the SN65EPT22 Pspice model. Any help is greatly appreciated. Thanks

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65EPT22: SN65EPT22 can't identify pins

  

  keshav basnet

  Resolved

  Part Number: SN65EPT22 HI, Just received SN65EPT22. I'm trying to use SN65EPT22 to convert TTL to LVPECL to drive SFP module, but actually can't locate the pin1 on the chip. I can'f find any reference mark/cut to identify the pin on the chip as described…

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum

• SN65EPT22: Termination Pin

  

  Mark Philip Felipe

  TI Thinks Resolved

  Part Number: SN65EPT22 Hi Team, we are looking on the termination details of the unused pin of this device. Thank you. -Mark

  • over 3 years ago
  • Interface
  • Interface forum

• SN65EPT22: Is there any reference schematic for SN65EPT22/23?

  

  Yunjing Wang1

  TI Thinks Resolved

  Part Number: SN65EPT22 Hi team, My customer want to use SN65EPT22/23 as voltage translator from LVTTL to LVPECL(SFP signal). Can you share the SN65EPT22/23 EVM schematic? Is there any reference design for this two device in LVTTL to LVPECL translator…

  • over 5 years ago
  • Interface
  • Interface forum

• SN65EPT22: SN65EPT22DGK - Need Maximum Rated Junction Temp

  

  Gabriel Garza45

  TI Thinks Resolved

  Part Number: SN65EPT22 Hello, We have a customer requesting the Maximum Rated Junction Temp. Could someone please advise? Thanks,

  • over 6 years ago
  • Interface
  • Interface forum

• Process technology | SN65EPT22

  

  Nick Cheng

  TI Thinks Resolved

  Other Parts Discussed in Thread: SN65EPT22 Dear Sir/Madam, There are queries which need inputs from the company for the following part: SN65EPT22 1) What is the process technology used to fabricate the SN65EPT22, is it purely based on bipolar technology…

  • over 9 years ago
  • Space & High Reliability (Read Only)
  • Space & High Reliability Forum (Read Only)

• Vcc for SN65EPT21 and SN65EPT22

  

  ttd

  Other Parts Discussed in Thread: SN65EPT21 , SN65EPT22 Dear Technical Support Team, I have a question about SN65EPT21 and SN65EPT22. Do you have negative supply (minus voltage) absolute min of Vcc for SN65EPT21 and SN65EPT22 ? Because negative…

  • over 8 years ago
  • Interface
  • Interface forum
Answered

• RE: SN65EPT22: Can I use this part as LVTTL to NECL translator by connecting VCC to GND, and GND to -3.3Vdc?

  

  Yaser Ibrahim

  Resolved

  Hello, Unfortunately, SN65EPT22 has not been tested or characterized under these conditions. Regards, Yaser

  • over 7 years ago
  • Interface
  • Interface forum
Answered

• SN65EPT22 output biased with 51ohm to GND

  

  John11513

  Resolved

  Other Parts Discussed in Thread: SN65EPT22 Hi team, The output of PECL driver such as SN65EPT22 is typically biased with 50ohm to Vcc-2V, or 150ohm to GND. My customer's previous design use 150ohm biasing. However, large EMI was observed due to bad…

  • Resolved

  • over 10 years ago
  • Interface
  • Interface forum

• CDCV304: Absolute input voltage VI and output resistance

  

  Hailiang Zhang

  TI Thinks Resolved

  Part Number: CDCV304 Other Parts Discussed in Thread: SN65EPT22 Hi Team, The spec says input voltage of CDCV304 shall be -0.5≤VI ≤ VCC+0.5, does this consider the input signal’s overshoot and undershoot? How about SN65EPT22? What is the output…

  • over 2 years ago
  • Clock & timing
  • Clock & timing forum

Didn't find what you are looking for? Post a new question.