Part Number: SN74AHC1G14-Q1 Tool/software: Hello experts,
We want to know about NC port of SN74AHC1G14-Q1.
We want to connect NC port (pin number 1) to GND via capacitance or high impedance resistor because it avoids a noise to input to this port…
Part Number: SN74AHC1G14-Q1 Tool/software: Hello experts,
We want to use SN74AHC1G14-Q1 to the satellite project.
Are there any restrictions on using it on satellites?
We are understanding that is not protected against outgassing and radiation.…
Part Number: SN74AHC1G14-Q1 Hello,
Our customer is looking for a logic inverter that supports slow input transitions (10us to 1ms transition time) similar to the SN74AHC1G14-Q1. Perhaps the datasheet is in error, but it shows that there is a transition…
The SN74LV4T08-Q1 device does not have Schmitt-trigger inputs. If you do not need voltage translation, use something like the SN74LVC1G14/SN74AHC1G14.
Schmitt-trigger inputs allow slower edges, but do not reduce the shoot-through current. If you care…
The SN74LVC1G17-Q1 datasheet specifies I off .
The SN74AHC1G14 datasheet specifies I I for any V CC , including 0 V. The outputs are not protected against overvoltage.
Other Parts Discussed in Thread: SN74AVC4T245 , SN74LVC1G06 , SN74AUP1G06 , SN74AUC1G06 , TPS74401 , SN74LVC1G04 , SN74AUP1G14 , SN74AHC1G14 , SN74AHCT1G14 , SN74LVC1G14 Hi Team,
Our customer wants to control the /OEx pin of SN74AVC4T245 with DCDC converter…
Other Parts Discussed in Thread: SN74LVC1G14-Q1 , SN74AHCT1G14 , SN74AHC1G14
Hi Team, Do we have solution to replace TC7SET14FU?
TC7SET14FU_datasheet_en_20160801.pdf
Thanks, SHH
Part Number: RM57L843 Other Parts Discussed in Thread: HALCOGEN
Tool/software:
Hello,
We are using the Hercules HDK RM57 reference board for development which has an EMIF SDRAM 64MB part with what our HW team understood to be 13-bit EMIF Address…
