3× SN74LVC2G66 in DSBGA might be smaller.
For 8-channel devices, consider SN74CB3Q3245, or SN74CBTLV3245A (less power and slightly cheaper, but lower bandwidth).
Ray,
The ESD CDM is not available for the SN74CBTLV3245A device so I would recommend using the SN74CB3Q3245 if you need this spec in your system.
Thank you,
Adam
Hi Cassidy, Unfortunately, the datasheet of TS2DDR2811 does not clearly claim Ioff when the switch is open. I am assuming when this chip was designed, it was strictly targeting DDR2 use case, while Ioff is normally a parameter of analog concern. If your…
Hi Lauren,
We do not have a drop-in replacement for this device. If another DDR device is required, TS3DDR4000 or TS3DDR3812 may be used. If a DDR device is not required, a suggested 8-channel 1:1 switch with high bandwidth would be SN74CB3Q3245.
…
Hello,
Thank you for posting to E2E.
I found the following E2E post by searching "TS2DDR2811 replace":
https://e2e.ti.com/support/switches-multiplexers/f/388/t/842942?tisearch=e2e-quicksearch&keymatch=ts2ddr2811%20replace
This thread states…
Part Number: TXS0108E Other Parts Discussed in Thread: SN74CB3Q3245 , SN74AHC4066 I'm using a TXS0108EPWR to buffer and translate some UARTs between a processor and an FTDI USB chip. The TX and RX pairs to the processor are all on the "A" side and the…
Hi Jejomar,
The SN74CB3Txxxx devices are used for their translation feature that you are encountering. Please refer to the following App note, for more information on how the architecture works. I am providing a link to our of our appnotes which talks…
Part Number: SN74CBT3125C Hi team,
My customer would like to know the temperature spec.
Do we have the Tc_max (case temperature) or θjc spec for SN74CBT3125CRGYR?
The reference information that is not guaranteed is also helpful.
Best regards,…
