Part Number: SN74CB3Q3253 Hello,
I am using the SN74CB3Q3253DBQR in my design and need to apply a thermal pad to the top of the component to cool it. What is the maximum pressure the thermal pad can apply to the component?
Thanks,
Rob Foster
Part Number: SN74CB3Q3253 Other Parts Discussed in Thread: UCC27211 Hi experts,
Our customer Ericsson is trying to use SN74CB3Q3253 in their power modules.
SN74CB3Q3253 to select different drive operation. To control different switch turn on and…
Part Number: SN74CB3Q3253 Hi,
My customer wants to know if SN74CB3Q3253 can support the hot-swap function.
And in this e2e SN74CB3Q3253: Whether it supports Hotswap and how to know it from datasheet - Switches & multiplexers forum - Switches & multiplexers…
Part Number: SN74CB3Q3253 I am considering using a SN74CB3Q3253RGYR mux/demux in a design, but only need to use section 1, I do not need section 2. What are recommended connections for the unused pins in section 2 (A, B1 -B4, I realize 2OEn should be…
Part Number: SN74CB3Q3253 Hi Team,
Customer would like to use SN74CB3Q3253 to replacement as below schematic, they have concern as below:
1. they found that VCC recommend 2.3V~3.6V in spec , therefore , if they want to change to pop this component…
Part Number: SN74CB3Q3253 Hi Team,
Our customer is wondering whether this socket could handle hot swap. I noticed in datasheet as below.
I have two questions now:
1. Can this socket handle hot swap? Could u please clarify the principle it can…
Part Number: SN74CB3Q3253 Other Parts Discussed in Thread: SN74HC153 , SN74HC139 , SN74AHC125 Hi team,
My customer is using the SN74CB3Q3253 now, Do we have p2p solution with SN74CB3Q3253 but can change source current ability(something like a buffer…
Part Number: SN74CB3Q3253 Other Parts Discussed in Thread: TMUX1204 Hi team,
My customer is using the device SN74CB3Q3253 now. We want to check whether we need to pull up or pull down the 2OE oin, if we just use the channel 1 function. Thanks.
Part Number: SN74CB3Q3253 I would like to use the SN74CB3Q3253RGYR (VQFN package) mux in a design, however the datasheet nowhere specifies the potential to which the central thermal pad should be connected, please confirm if floating or if it needs to…
Hi Ali,
If your JTAG signal voltage and bandwidth is within the recommended operating conditions, then SN74CB3Q3253 can work.
Do you need 2 channels or 4 channels for your application?
Here is a list of devices you can further look at in the device…
