Hi Kay,
VIH is for S and OE pin, so VIH has nothing to do with A pins and B pins.
Section 8.3 says data I/O support 0 ~ 5V, meaning A pins and B pins can be from 0.8V, 1.2V, 5V etc. However, S pin should still comply VIH = 2V requirement.
…
Hi James-san,
Our customer would like to know “θJC”.
We can’t find this value in the datasheet.
Could you please let us know if you have this value?
Regards,
Kanemaru
Other Parts Discussed in Thread: SN74CB3Q3257 Hi,
Planning to use SN74CB3Q3257 IC to switch communication signals (10Mbps). Application is to switch Ethernet signals(TX+, TX-, RX+, RX-) from one source to two targets, switching will not happen frequently…
Hi Team,
Our customer would like to know the junction temperature.
We can’t find this value in the datasheet.
However, I believe that the junction temperature is usually 125℃.
Is my understanding correct?
Regards,
Kanemaru
Part Number: SN74CB3Q3257 Other Parts Discussed in Thread: SN74AUC2G53 , , SN74CBT3253 e2e,
I would like to mux SPI and I2C signals.
Is there a 1V8 version of SN74CB3Q3257? Closest thing I could find is SN74AUC2G53, but this is a single channel…
Other Parts Discussed in Thread: SN74CBTLV16800 , SN74CB3Q3257 Hi,
unused control pin of SN74CB3Q3257 and SN74CBTLV16800 has to be connected to GND or VCC.
how about in case of I/O pin? is floating ok?
Thanks in advance.
Other Parts Discussed in Thread: SN74CBTLV16800 , SN74CB3Q3257 Hi,
When VCC of SN74CB3Q3257 or SN74CBTLV16800 is 0V, if B port is high, is there some voltage level in VCC due to leakage?
If correct, is there no damage or abnormal operation? ex)A port…
Other Parts Discussed in Thread: SN74CB3Q3257 Hi,
I'm going to use a TI bus switch SN74CB3Q3257 for multiplexing two 13.56 RFID antennas to share them on the uniqe NFC transceiver.
I'm not shure it works well as an analog switch at 13.56Mhz, I yet…
Other Parts Discussed in Thread: TS3L110 Team,
Is the TS3L110 the same silicon as the Q3257? Customer already has the Q3257 in the AVL and need it for 10/100 Base-T switching. I believe they are drop-in devices but for 10/100Base-T they would just…
Part Number: TMUX1574 Other Parts Discussed in Thread: SN3257-Q1 , SN74CB3Q3257 Tool/software: Hello,
Per the datasheet, the TMUX1574 & SN3257-Q1 both support powered-off protection only up to 3.6V in the signal paths. Figure 14 in the TMUX1574 datasheet…
