Part Number: SN74CBTLV3245A Other Parts Discussed in Thread: SN74CB3Q3345 Hi Expert,
There are two solution that customer chosed.
One is SN74CBTLV16212GR, the other one is SN74CBTLV3245APWR.
The question is if they have 5ns pulse need transfer from input…
Other Parts Discussed in Thread: SN74CB3Q3345 While all TI switches and multiplexers incorporate some type of ESD protection, the way they are implemented can differ significantly. The typical implementation can be seen below (simplified model):
You can use the SN74CB3Q3345 ? This device has two OE pins, 1 that is active high and 1 that is active low.
To use this as a device with 1 active high OE pin you can connect the active low OE pin to logic high. This achieves the same results. …
The best recommendation for an 8 channel SPST switch is SN74CB3Q3345 .It offers small package size (VQFN) and input voltage upto 5V.
Other for an 8 channel SPST switch can be found at the link here .
Part Number: SN74CBT3345 Other Parts Discussed in Thread: SN74CB3Q3345 It is written in datasheet that when IC is enabled then PORT A=PORT B.But I am getting 1 volt drop at output.What may be the possible reasons for this voltage drop.
Part Number: SN74CBTLV3245A Other Parts Discussed in Thread: SN74CB3Q3345
We are looking for a same function solution which is an OCTAL FET BUS switch IC with OE pin active high?
SN74CBTLV3245A OE pin is active low.
Could you please help to let…
I'm sorry for providing enough information.
In their system, input voltage is required 24V so SN74CB3Q3345 which was suggested could not be used.
We have looked for any suitable device, but we could not.
Are there any proposal in stead…
The voltage on A1 would not rise if there were not something that sources current. Are you sure that the yellow trace is A1 and not B1?
Anyway, the TXB imposes restrictions on the I/O load in order to allow level shifting and automatic direction sensing…