Part Number: SN74CBT3125C Other Parts Discussed in Thread: SN74CBT3125 ,
Tool/software:
Hi all,
I would like to ask about the difference between SN74CBT3125C and SN74CBT3125 as follows.
1) Protocols,
SN74CBT3125:Analog
SN74CBT3125C:Analog…
Part Number: SN74CBT3125C I am looking for similar part but with 3.3V VCC and need this switch for 70MHZ SPI operation, please suggest the approriate alternate
Part Number: SN74CBT3125C Hi team,
My customer would like to know the temperature spec.
Do we have the Tc_max (case temperature) or θjc spec for SN74CBT3125CRGYR?
The reference information that is not guaranteed is also helpful.
Best regards,…
Part Number: SN74CBT3125C Hi
I use the device as test driver and then there's question about "ON-state switch current, II/O ±128mA " for 4 output port sharing.
When only active one output port (ie. 1B ON but 2B/3B/4B OFF), dose driving current of…
Part Number: SN74CBT3125C Other Parts Discussed in Thread: SN74LVC1G139 , TS12A44514 , TS12A44515 , TS12A44513 Hi All,
I have a question about SN74CBT3125C.
Is 1B output when VCC and 1A are shorted? When a voltage of VCC-0.8V or more is input to 1A…
Part Number: SN74CBT3125C Other Parts Discussed in Thread: SN74CBT3257C , SN74CBT3125 Hello,
My customer is evaluating use of 2x SN74CBT3125C in place of SN74CBT3257C due to space constraints.
Is the switching frequency between these two parts the…
Part Number: SN74CBT3125C Other Parts Discussed in Thread: TMUX1511 Hello,
It seems I've made a mistake by powering the SN74CBT3125C with a 3.3V supply in my design. It's been working so far, but what operating parameters are limited at lower VDD? …
Saminah, For sure, while it doesn't explicitly state "Powered off protection", the SN74CBT3125C will offer the powered off protection you want (Up to 5.5V!). To check if a certain device has powered off protection, check the datasheet for the powered…
Part Number: SN74CBT3125C Other Parts Discussed in Thread: TMUX1511 Can you please confirm that SN74CBT3125C is suitable to use with I2C signals? The master is on the A side and slave is on the B side. SDA and SCL /OEs are turned on at the same time.
