Part Number: SN74CBTD3861 Other Parts Discussed in Thread: SN74CBT3861 Hej,
we are considering using the SN74CBTD3861 for interfacing between a 3.3V FPGA and 5V external logic.
I have looked at the following link and the footnotes in the data sheet…
Part Number: SN74CBTD3861 Hi Expert,
Regarding the Datasheet, I wonder know if there is any misunderstanding of my perspective.
When the input voltage A1=5V, OE' is low, VCC= 5V, then the output will be 3.3V?
I know it will be slight different…
Hi Deekshitha,
It's not really an OUTPUT. It is a low-impedence pass-through when on.
From the product description:
The device is organized as one 10-bit switch with a single output-enable (OE)\ input. When (OE)\ is low, the switch is on, and port…
Hello BMA,
When the FPGA logic is implemented, there is generally a front end GPIO where current can be sunk/sourced allowing the designated values of 1 or 0 to be passed onto the upcoming registers. However, when your FPGA does not have logic, that…
Hello Kane, The ESD specs are as follows: CDM 500V HBM 1500V MM 150V Also may I ask what you intend to use SN74CBTD3861 for? If these values do not satisfy your desired specs, I may be able to recommend an alternative.
Part Number: SN74CB3T3245 Other Parts Discussed in Thread: SN74CBTD3861 Hi,
Part Number : SN74CB3T3245; which has absolute maximum rating for Vcc = 7V.
But the recommended rating and waveform given for 2.3V(min) to 3.6V(max).
We have planned to…
