Part Number: SN74CBTLV16292 Tool/software: Dear TI Team,
I would like to inquire about the SN74CBTLV16292 specifications. According to the datasheet, with a 3.3V supply voltage (VCC), the VIH (High-level control input voltage) must be greater than 2V…
Part Number: SN74CBTLV16292 Tool/software: Our application requires muxing 12ch high speed(ish) (~10MHz) 1.8V digital signals with a 2:1 mux.
I see the SN74CBTLV16292 mux if powered at > 2.3V, should be able to mux 1.8V digital logic signals. However…
Part Number: SN74CBTLV16292 Tool/software: We are using SN74CBTLV16292 for muxing application and in case the output pin is not used then there is an internal pull down which gets activated which is leading to Bus contention as the same pin is connected…
Part Number: SN74CBTLV16292 Other Parts Discussed in Thread: 74AC16245 , SN74ABT861 , SN74LVC861A , , SN74CBTLV3861 Hi I m looking for a bi-directional mux for application design , and saw this which is a singe direction , please advise a bi-direction…
Part Number: SN74CBTLV16292 Hi, I want to use a SN74CBTLV16292VR mux/switch to pass 1V8 data bus, I assume this is not an issue IF I run
the switch at VCC = 2V5. Can you confirm? Thanks, Patrick
Part Number: SN74CBTLV16292 Hi Experts,
Good day.
I would like to confirm if the device SN74CBTLV16292 pins' B-sides and A-sides can be configured as inputs and outputs respectively?
Is it possible? Thank you.
Regards, Archie A.
Part Number: SN74CBTLV16292 Other Parts Discussed in Thread: TS3DDR3812 Hi,
I would like to get an S-parameter model for SN74CBTLV16292. I need this to combine with board interconnect in a system-level S-parameter analysis.
thanks,
-Shriram
Other Parts Discussed in Thread: SN74CBTLV16292 art Number: SN74CBTLV16292
HI TI pals
I use SN74CBTLV16292 as BT656 signal mux, When I measured the clock(14x MHz).
The two outputs looks strange(blue is 9B1, green is 9B2)
Is this not suitable?…
