Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 Dear Team,
Customers currently use SN74GTL2003, they ask us if there is a newer generation solution to recommend?
P2P's priority recommendation! Thank you!
Many Thanks,
Jimmy
Part Number: SN74GTL2003 Dear team,
customer want to check if we can separate GREF and DREF pin and control by CPLD( open drain signal).
Is there any risk for this application?
Regards,
Ben
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 Hello Team,
Let me clarify my understanding.
Can the Sx and Dx pull-up supply be used at 1V to 5V if Vsrer=1V, Vgref=Vdref=3.3V?
I want to check about the SX/Dx pull-up power supply can…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 Hi Team,
What’s Source-Drain Diode forward voltage for SN74GTL2003 ?
Best regards,
Hardy
tatarao kuramdasu said: 1. What is the common resistor value i can use for 1.8V to 5.5V range
This is dependent on your system -- you must select resistors that will meet your drive capabilities and parasitic capacitances.
tatarao kuramdasu said: 2. Do…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 Hello, I'm considering using two SN74GTL2003 in a back-to-back configuration, where S_REF1 is at V1, D_REF1/G_REF1/D_REF2/G_REF2 are at 5V and S_REF2 is at V2, to make a bidirectional level…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: SN74LVC1G34
Hi Team
I am using SN74GTL2003 level translator to pass a 50MHz clock through it. Please let me if this is the right part for this application
1) I see in the SN74GTL2003 datasheet it…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 , Hello,
I am considering using this part in my design. I want to clarify the specification of the shifted voltage level.
All application examples shown in the datasheet show only voltage…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108 , , SN74TVC16222A Can i use 3 x SN74GTL2003PWR part as an replacement for NXP GTL2000DGG. will it have any major impact on the performance.
kindly let me know if i need to take any precaution…
Part Number: SN74GTL2003 Other Parts Discussed in Thread: LSF0108
Hi E2E,
I need the IBIS model of SN74GTL2003 to do the simulation.
I know TI does not have it.
Is there any IBIS model that can be substituted in the simulation and act as same as SN74GTL2003…