Part Number: TMUX1308 Other Parts Discussed in Thread: TMUX1309 , SN74LV4052A Hi team,
My customer is currently using the SN74LV4052APWR(TSSOP), but they want to replace it to TMUX1308(TSSOP).
I think these devices are not pin to pin. Is that correct? If…
Hello NCal
To add to what Clemens said either device will work for your application. if your are looking for an soic package device you can consider either the CD74HC4052M96 or SN74LV4052ADR as both of these devices will have longevity and not be EOLing…
Part Number: SN74LV4052A Hi team,
Does the SN74LV4052APW work for below?
VCC connect to GND and GND connect to -5V.
So input is 0~-5V and output is 0~-5V workable?
If not, do you have recommend part?
Thanks!
Part Number: SN74LV4052A Other Parts Discussed in Thread: TMUX1309 Hi Sir,
My customer is looking for a pin to pin compatible solution with 74LV4052PW.
And we just found our SN74LV4052A pin define is the same but VCC range can't meet due to my customer…
Part Number: SN74LV4052A-Q1 Other Parts Discussed in Thread: SN74HC4852-Q1 , SN74HC4852 , TS3A5017-Q1
Hello team, I am trying to sense 4-phase current and 4 number of inductor current by using SN74LV4052A-Q1 as below in datasheet.
However I worries about…
Hi Kevin,
All our signal switches are bi-directional.
For a 4:1, 2 channel switch configuration, you can use the SN74LV4052A-Q1 for your application as long as the UART signal voltage and bandwidth is within the recommended operating conditions.
Using the…
Chun,
The recommended operating conditions state that the I/O may be between 0 and Vcc. There isn't a requirement that it must be at Vcc.
Thank you,
Adam
Part Number: SN74LV4052A-Q1 Other Parts Discussed in Thread: LMH6580 Hi team,
Could you please help to check if we have suitable solution to replace SGM6510? Better to have AEC-Q version.
As well as 74HCT4052DB/74AHCU04PW/74LVC2G14GW.
Thanks!
Part Number: SN74LV4052A
Hello,
I would like to use this part as an I2C mux and had a question regarding the pull up resistors. Figure 13 of the datasheet shows a typical I2C mux configuration, is it really necessary to have pull up resistors on every…
Part Number: CD4052B Other Parts Discussed in Thread: CD4053B , CD4051B , SN74LV4052A , CD74HC4052 Hi,
I am trying to use the CD4052B as a video multiplexer for AHD cameras. I am using X a Y to connect the coax core and shield. The idea is to thave a single…